/BinaryPack

The fastest and most memory efficient binary serialization library for .NET Standard 2.1, powered by dynamic IL generation

Primary LanguageC#MIT LicenseMIT

BinaryPackIcon NuGet NuGet AppVeyor

BinaryPack is a binary serialization library inspired by MessagePack, but even faster, more efficient and producing smaller files. The goal of this project is to be able to use BinaryPack as a drop-in replacement for JSON, XML, MessagePack or BinaryFormatter serialization, when the serialized models don't need to be shared with other applications or with web services. BinaryPack is built to be as fast and memory efficient as possible: it uses virtually no memory allocations, and the serialized data is packed to take up as little space as possible. Whenever you're using either JSON, MessagePack, XML or some other format to cache data for your apps, to send data between clients or to save data that is not critical, you can try using BinaryPack over your previous serialization library - it will provide the same basic functionalities to serialize and deserialize models, but with much higher performance and less memory usage.

BinaryPack-benchmark

This benchmark was performed with the JsonResponseModel class available in the repository, which contains a number of string, int, double and DateTime properties, as well as a collection of other nested models, representing an example of a JSON response from a REST API. This README also includes a number of benchmarks that were performed on a number of different models. The benchmark code and all the models used can be found in this repository as well. To summarize:

  • BinaryPack was consistently the fastest library, both during serialization and deserialization. The performance difference ranged from 7.6x faster than Newtonsoft.Json, 7x than Utf8Json and 1.9x than MessagePack when serializing a small JSON response, to 245x faster than Newtonsoft.Json, 129x than Utf8Json and 3.9x than MessagePack when dealing with mostly binary data (eg. a model with a large float[] array).
  • The memory usage was on average on par or better than Utf8Json, except when deserializing mostly binary data, in which case BinaryPack used 1/100 the memory of Utf8Json, and 1/2 that of MessagePack. BinaryPack also almost always resulted in the lowest number of GC collections during serialization and deserialization of models.
  • In all cases, the BinaryPack serialization resulted in the smallest file on disk.

Table of Contents

Installing from NuGet

To install BinaryPack, run the following command in the Package Manager Console

Install-Package BinaryPack

More details available here.

Quick start

BinaryPack exposes a BinaryConverter class that acts as entry point for all public APIs. Every serialization API is available in an overload that works on a Stream instance, and one that instead uses the new Memory<T> APIs.

The following sample shows how to serialize and deserialize a simple model.

// Assume that this class is a simple model with a few properties
var model = new Model { Text = "Hello world!", Date = DateTime.Now, Values = new[] { 3, 77, 144, 256 } };

// Serialize to a memory buffer
var data = BinaryConverter.Serialize(model);

// Deserialize the model
var loaded = BinaryConverter.Deserialize<Model>(data);

Supported properties

Here is a list of the property types currently supported by the library:

✅ Primitive types (except object): string, bool, int, uint, float, double, etc.

✅ Nullable value types: Nullable<T> or T? for short, where T : struct

✅ Unmanaged types: eg. System.Numerics.Vector2, and all unmanaged value types

✅ .NET arrays: T[], T[,], T[,,], etc.

✅ .NET collections: List<T>, IList<T>, ICollection<T>, IEnumerable<T>, etc.

✅ .NET dictionaries: Dictionary<TKey, TValue>, IDictionary<TKey, TValue> and IReadOnlyDictionary<TKey, TValue>

✅ Other .NET types: BitArray

Attributes

BinaryPack has a series of attributes that can be used to customize how the BinaryConverter class handles the serialization of input objects. By default, it will serialize all public properties of a type, but this behavior can be changed by using the BinarySerialization attribute. Here's an example:

[BinarySerialization(SerializationMode.Properties | SerializationMode.NonPublicMembers)]
public class MyModel
{
    internal string Id { get; set; }    
    
    public int Valud { get; set; }    
    
    [IgnoredMember]
    public DateTime Timestamp { get; set; }
}

Similarly, there's also a SerializableMember that can be used when the mode is set to SerializationMode.Explicit.

FAQ

Why is this library faster than the competition?

There are a number of reasons for this. First of all, BinaryPack dynamically generates code to serialize and deserialize every type you need. This means that it doesn't need to inspect types using reflection while serializing/deserializing, eg. to see what fields it needs to read etc. - it just creates the right methods once that work directly on instances of each type, and read/write members one after the other exactly as you would do if you were to write that code manually. This also allows BinaryPack to have some extremely optimized code paths that would otherwise be completely impossible. Then, unlike the JSON/XML/MessagePack formats, BinaryPack doesn't need to include any additional metadata for the serialized items, which saves time. This allows it to use the minimum possible space to serialize every value, which also makes the serialized files as small as possible.

Are there some downsides with this approach?

Yes, skipping all the metadata means that the BinaryPack format is not partcularly resilient to changes. This means that if you add or remove one of the serialized members of a type, it will not be possible to read previously serialized instances of that model. Because of this, BinaryPack should not be used with important data and is best suited for caching models or for quick serialization of data being exhanged between different clients.

Is this compatible with UWP?

Unfortunately not at the moment, UWP is still on .NET Standard 2.0 and doesn't support dynamic code generation due to how the .NET Native compiler is implemented. Hopefully it will be possible to use BinaryPack on UWP when it moves to .NET 5 and the new MonoAOT compiler in the second half of 2020.

Benchmarks

Here are three full benchmarks executed with the benchmark sample included in this repository. The error and standard deviation columns have been removed to fit each table in the horizontal space available for the README file reader on GitHub. As mentioned before, the JSON response model used in the first two benchmarks is the JsonResponseModel class. The class used in the last benchmark is instead NeuralNetworkLayerModel.

JSON response

Method Categories Mean Ratio Gen 0 Gen 1 Gen 2 Allocated
NewtonsoftJson Serialization 1.083.1 us 1.00 156.2500 121.0938 107.4219 205083 B
BinaryFormatter Serialization 1.446.6 us 1.34 132.8125 68.3594 37.1094 402558 B
NetCoreJson Serialization 1.147.0 us 1.06 199.2188 142.5781 140.6250 252407 B
XmlSerializer Serialization 1.274.5 us 1.18 250.0000 146.4844 107.4219 604205 B
Utf8Json Serialization 744.4 us 0.69 140.6250 140.6250 140.6250 495 B
MessagePack Serialization 217.3 us 0.20 61.0352 61.0352 61.0352 432 B
BinaryPack Serialization 168.1 us 0.16 26.6113 26.6113 26.6113 108 B
NewtonsoftJson Deserialization 2.092.1 us 1.00 66.4063 19.5313 - 304320 B
BinaryFormatter Deserialization 1.466.9 us 0.70 130.8594 48.8281 - 676136 B
NetCoreJson Deserialization 1.964.5 us 0.94 50.7813 15.6250 - 220856 B
XmlSerializer Deserialization 2.098.6 us 1.00 132.8125 70.3125 35.1563 461000 B
Utf8Json Deserialization 887.0 us 0.42 165.0391 131.8359 109.3750 237159 B
MessagePack Deserialization 337.0 us 0.16 87.4023 53.2227 35.1563 241462 B
BinaryPack Deserialization 168.8 us 0.08 46.6309 13.9160 - 215192 B

Neural network layer model

Method Categories Mean Ratio Gen 0 Gen 1 Gen 2 Allocated
NewtonsoftJson Serialization 26,552.5 us 1.000 1281.2500 93.7500 62.5000 5217488 B
BinaryFormatter Serialization 175.5 us 0.007 70.5566 33.9355 33.6914 155111 B
NetCoreJson Serialization 36,868.3 us 1.389 1071.4286 71.4286 71.4286 4248542 B
XmlSerializer Serialization 31,354.5 us 1.181 1250.0000 468.7500 437.5000 3452059 B
Utf8Json Serialization 13,936.4 us 0.525 109.3750 109.3750 109.3750 72 B
MessagePack Serialization 421.0 us 0.016 111.3281 111.3281 111.3281 762 B
BinaryPack Serialization 108.9 us 0.004 10.0098 10.0098 10.0098 96 B
NewtonsoftJson Deserialization 25,525.0 us 1.000 1687.5000 62.5000 31.2500 6994104 B
BinaryFormatter Deserialization 126.4 us 0.005 13.9160 10.7422 10.7422 13247 B
NetCoreJson Deserialization 16,771.4 us 0.657 62.5000 31.2500 31.2500 133380 B
XmlSerializer Deserialization 38,382.1 us 1.503 1071.4286 428.5714 285.7143 3575022 B
Utf8Json Deserialization 17,709.0 us 0.694 187.5000 187.5000 187.5000 101100 B
MessagePack Deserialization 978.2 us 0.039 95.7031 95.7031 95.7031 1258 B
BinaryPack Deserialization 111.8 us 0.004 10.0098 9.8877 9.8877 826 B

Requirements

The BinaryPack library requires .NET Standard 2.1 support and it has no external dependencies.

Additionally, you need an IDE with .NET Core 3.0 and C# 8.0 support to compile the library and samples on your PC.

Special thanks

Icon made by freepik from www.flaticon.com.