/conformance

Conformance test suite for Connect, gRPC, and gRPC-Web implementations.

Primary LanguageGoApache License 2.0Apache-2.0

Connect Conformance

License CI

A test suite for Connect that verifies cross-platform conformance for both clients and servers.

Summary

The Connect conformance test suite is a series of tests that are run using a client and server to validate interoperability, compatibility, and conformance across the Connect, gRPC, and gRPC-Web protocols. The test suite is meant to exercise various scenarios with a client-server interaction to ensure the results are as expected across platforms.

Tests are divided into two types: client tests and server tests. Those which verify clients are run against a reference server implementation of the Conformance Service written with connect-go.

Likewise, servers under test will be verified by a reference client implementation of the Conformance Service also written with connect-go.

To verify compatibility with other protocol implementations, the conformance tests also use reference client and server implementations that use the gRPC-Go module and a reference server implementation that uses the gRPC-Web Go server.

Documentation

Detailed guides can be found in the "docs" sub-directory of this repo. If you first want to read a shorter overview, see the next section below. But when you really get started with any of these tasks, you'll want to read one or more of these guides.

How it works

The tests are data-driven: all test cases are defined in YAML files in this repo. These files get embedded in the test runner so that the single self-contained executable contains all of the test case data.

The test runner first processes your configuration and uses that to select which test cases are relevant. Even if a test case is known to fail, it will still be executed to make sure it is still failing (and report the fact if the test actually passes).

It then groups all of the test cases by the server configuration needed. So test cases that will use TLS and the Connect protocol are in a different group from test cases that do not use TLS and use the gRPC protocol.

It then begins running the tests.

sequenceDiagram
  actor user
    create participant test runner
    user ->> test runner: run conformance suite

    create participant client
    test runner -->> client: start process

    rect rgb(255,250,240)
    loop for each server config
        create participant server
        test runner -->> server: start process
        test runner ->> server: send config via stdin
        server ->> test runner: send result via stdout

        rect rgb(240,255,240)
        loop for each test case
            test runner ->>+ client: send RPC details via stdin
            client ->>+ server: invoke RPC, send request(s)
            server ->> server: process RPC
            server ->>- client: send response(s)
            client ->>- test runner: send RPC results via stdout
            test runner ->> test runner: assess RPC results
        end
        end

        destroy server
        test runner --x server: terminate
    end
    end

    destroy client
    test runner --x client: terminate

    destroy test runner
    test runner ->> user: report results
Loading

It first starts a client process (either a client under test, if in client mode, or a reference client).

For each server configuration, it starts a server process (either a server under test, if in server mode, or a reference server). It sends the server configuration details by writing them to the process's stdin. When the server is listening on the network and ready to accept RPCs, it sends the details to the test runner by writing to its stdout.

For each test case that applies to this server configuration, it adds details to the test case data with the server's address, so the client will know how to reach it. It then sends the test case data to the client by writing them to the process's stdin. The client then invokes the RPC. It reports the RPC results to the test runner by writing them to its stdout.

The test runner decides whether the test case was successful or not by comparing the RPC results against expected results.

After all tests have been run and all child processes stopped, it reports the results.

Testing your implementation

Setup

The conformance runner has the ability to test a client, a server, or both simultaneously. This means that if you are validating both a server and a client, you can use the conformance suite to run them against each other. Testing either a client or server in isolation will use the corresponding reference implementation to verify conformance.

Below are the basic steps needed for setting up the suite to run against your implementation:

  1. The first step is to access an SDK for the Conformance protos. These can be found on the Buf Schema Registry: https://buf.build/connectrpc/conformance. You can download SDKs for some languages here.

    If you are using a language that is not supported by the BSR's selection of SDKs, you can generate one yourself using the buf command-line tool. After creating a buf.gen.yaml file, to configure the code generation, you'll then run buf generate buf.build/connectrpc/conformance.

  2. Once you have an SDK, with generated code for the Conformance Service and related messages, you will need to implement either the service, the client, or both (depending on which you are testing). To do so, follow the instructions specified in the ConformanceService proto.

    For working examples, refer to the Go reference client and reference server.

  3. Your service-under-test or client-under-test needs to be a program that can easily be invoked from the command-line. This is how the conformance test runner will invoke it, too.

  4. Next, visit this repository's Releases page and download the conformance runner binary: connectconformance. You may want to add it to your $PATH to make it easier to run interactively from the command-line.

  5. Finally, integrate the conformance tests into the continuous integration and testing process for your code, so every change you make can validate that the implementation remains conformant. You can see an example of how this can be done using make in the connect-kotlin repo, here and here.

Running the tests

The commands for testing will depend on whether you are testing a client, a server, or both. Specifying which implementation is done via the mode command line argument.

Once you have completed setup, the following commands will get you started:

Testing a client

connectconformance --mode client -- <path/to/your/executable/client>

Testing a server

connectconformance --mode server -- <path/to/your/executable/server>

Testing both a client and server

To test your client against your server, specify a mode of both, with the client path first, followed by ----, then the path to your server:

connectconformance --mode both -- <path/to/your/executable/client> ---- <path/to/your/executable/server>

Running the reference tests

To test this repo and the reference clients and servers, we can use the conformance suite itself. To run the suite, using the reference clients against the reference servers, and see the process in action, use the following command:

make runconformance

This will build the necessary binaries and run tests of the following implementations.

  • Connect reference client and reference server
    • These implementations are written using connect-go, but with numerous extensions that allow them to more closely examine the on-the-wire format of the RPC protocol to make stronger assertions about conformance.
    • They support all features that can be tested by the conformance tests, which includes all three protocols (Connect, gRPC, gRPC-Web), all HTTP versions (HTTP 1.1, HTTP/2, and even HTTP/3), and a variety of compression encodings ("gzip", "br", "zstd", "deflate" and "snappy").
  • gRPC client and server
    • These implementations are written using grpc-go.
    • They support the gRPC protocol and HTTP/2. They only support the "proto" codec for message encoding and the "gzip" compression encoding.
    • The server also supports the gRPC-Web protocol and HTTP 1.1 using the improbable-eng/grpc-web Go implementation. This implementation is listed in the official gRPC-Web documentation as a server/proxy option here. (Note that the gRPC client does not support gRPC-Web.)
    • These implementations are also used against clients-under-test and servers-under-test, to confirm interoperability with official gRPC implementations.

Both of the above clients are tested against both the Connect reference server and the gRPC server. Both servers are tested against the Connect reference client and the gRPC client. And since the gRPC client does not support gRPC-Web, the servers are also tested against the official gRPC-Web JS client.

Status: Stable

This repo is stable and follows semantic versioning.

We will not make breaking changes to the command-line interface, the YAML config formats, or the Protobuf messages used by clients and servers under test in the 1.x series of releases.

Note, however, that we reserve the right to rename, remove, or re-organize individual test cases, which may impact the "known failing" and "known flaky" configurations for an implementation under test. We will document these changes in the release notes.

We also intend to occasionally add new test cases, and occasionally these additions may also necessitate updates to the Protobuf schemas (such as new request or response fields). The Protobuf changes will remain compatible, so your programs will continue to compile, but actually passing new/updated test cases may require updates to your program, to incorporate the new fields into the behavior of the client or server under test. These kinds of changes will also be documented in the releases notes.

New test cases in a release could also reveal previously undetected conformance issues which may require fixes to the implementations you are testing. So while we aim for backwards-compatibility and making it easy to upgrade to new releases of the conformance suite, it is expected that some releases may incur some effort to adopt. (See the docs for more details.)

Ecosystem

Implementations

Examples

Ancillary

For more on Connect, see the announcement blog post, the documentation on connectrpc.com (especially the Getting Started guide for Go), or the demo service.

Legal

Offered under the Apache 2 license.