Buildlight using NodeJS

Drives a buildlight by polling jenkins and turning the buildlight into the apropriate color

First time follow the Linux instructions (if applicable) and then npm install

Run with node check-build.js

Linux speciffic prerequisites

Node-hid requires libudev-dev and libusb-1.0-0 to install successfully. On Raspian, you can install these using:

sudo apt-get install libudev-dev libusb-1.0-0-dev

On Linux you also need to grant permissions to write to the Delcom device. On Raspian, you can create a file:

sudo nano /etc/udev/rules.d/85-delcom.rules

With the following rule (replace the group name with a group of your choice):

SUBSYSTEM=="usb", ATTRS{idVendor}=="0fc5", ATTRS{idProduct}=="b080", ACTION=="add", SYMLINK+="delcom", MODE="0666", GROUP="pi"

You will have to reboot to make the rule take effect.