contiv-experimental/cluster

Issues

• extra-vars should be passed in the request body than as query-vars

  #99 opened 9 years ago by mapuri
  1

• [question] how to deploy volplugin using contiv-cluster

  #139 opened 8 years ago by angry-tony
  4

• Doc update request - make service_vip a parameter in the node commissioning section of install guide

  #187 opened 8 years ago by neelimamukiri
  2

• Proposal: support runtime configuration changes for clustermgr

  #174 opened 8 years ago by mapuri
  1

• Commissioning of a node failing in B-series inconsistently

  #172 opened 8 years ago by pradvara
  12

• Services are not running when bringing up node after shutdown in B-series cluster

  #169 opened 8 years ago by pradvara
  0

• Discover of node is failing with invalid control interface

  #157 opened 8 years ago by pradvara
  2

• Discover not happening after restarting the controller

  #166 opened 8 years ago by pradvara
  1

• remove the `node` related REST endpoint

  #164 opened 8 years ago by mapuri
  0

• netlugin_if should be renamed to netplugin_interface for consistency.

  #145 opened 8 years ago by vvb
  0

• Proposal: implement node configuration update

  #160 opened 8 years ago by mapuri
  3

• etcd restart fails on the master node

  #92 opened 8 years ago by vvb
  2

• Not able to "Commission" or "Discover" a node which is in "Disappeared" state.

  #158 opened 8 years ago by pradvara
  1

• add support for referring nodes with an alias

  #162 opened 8 years ago by mapuri
  0

• show node lifecycle event history in node info

  #115 opened 9 years ago by mapuri
  0

• Commissioning service-worker node failure on 'etcd' task - copy the etcd start/stop script

  #154 opened 8 years ago by rkharya
  3

• UCP services fails to start on replicas

  #152 opened 8 years ago by rkharya
  10

• netmaster IP address issue in cluster setup done using make demo target

  #151 opened 8 years ago by vishal-j
  2

• UCP controller node re-commissioning results in controller state failure

  #149 opened 8 years ago by rkharya
  3

• Commissioning of a node failing inconsistently

  #148 opened 8 years ago by pradvara
  1

• Cannot commission node which was used to create exiting cluster - 'build node' commissioning failuers

  #140 opened 8 years ago by rkharya
  13

• Add/update README.md with explanation of output for get commands

  #135 opened 8 years ago by mapuri
  1

• put together a debug guide for troubleshooting failures and reporting issues

  #141 opened 8 years ago by mapuri
  0

• Cluster job is in "Queued" state even after discovery of the node

  #143 opened 8 years ago by pradvara
  1

• Support for node image management

  #137 opened 8 years ago by mapuri
  0

• Node commissioning failing with OVS service start timeout error

  #136 opened 8 years ago by rkharya
  10

• add more human readable formatting for `clusterctl <> get` commands

  #116 opened 8 years ago by mapuri
  0

• fixup clusterctl and clusterm versions

  #128 opened 9 years ago by mapuri
  0

• It will be useful if the job input endpoint returns command that was run

  #125 opened 9 years ago by mapuri
  0

• Proposal: add REST endpoints for monitoring subsystem

  #121 opened 9 years ago by mapuri
  2

• serf/monitor events shall be delivered using REST API

  #97 opened 9 years ago by mapuri
  1

• what should happen when a node disappears and appears again?

  #123 opened 9 years ago by mapuri
  0

• use the official go-client for collins

  #110 opened 9 years ago by mapuri
  0

• Node de-commissioning stuck forever, need a recovery mechanism

  #114 opened 9 years ago by rkharya
  2

• Node commissioning tasks status messages should be part of 'clusterctl node c < >'

  #103 opened 9 years ago by rkharya
  1

• Proposal: return logs and status of the provision job as REST endpoint

  #113 opened 9 years ago by mapuri
  7

• node role/host-group management

  #69 opened 9 years ago by mapuri
  6

• While node is getting commissioned, we should not allow commissioning of the same again

  #104 opened 9 years ago by rkharya
  6

• use port 9007 as a default for clusterm API to follow other contiv services

  #102 opened 9 years ago by mapuri
  0

• update baremetal.md to include setting `control_interface` as part of clusterm install step

  #105 opened 9 years ago by mapuri
  0

• cluster-manager should be able to perform operations on multiple nodes

  #86 opened 9 years ago by mapuri
  1

• Proposal: multi-node operation support

  #98 opened 9 years ago by mapuri
  3

• cluster manager shall try and perform a cleanup in case of provision failure

  #85 opened 9 years ago by mapuri
  4

• Vagrant Setup Fails

  #95 opened 9 years ago by danehans
  2

• Proposal: Support Cluster API abstraction

  #91 opened 9 years ago by danehans
  5

• Cluster-manager installation fails via baremetal provisioning route

  #80 opened 9 years ago by rkharya
  9

• clusterctl discover command should not be a blocking call.

  #84 opened 9 years ago by vvb
  1

• Proposal: Add a baked in inventory client

  #79 opened 9 years ago by mapuri
  0

• 5 nodes out of 8 node cluster becomes "Unallocated" deploying containers

  #76 opened 9 years ago by rkharya
  3

• 1st node commissioning failures @ucp-finerprint

  #68 opened 9 years ago by rkharya
  1