corbanmailloux/esp-mqtt-rgb-led

Issues

• White LED is always ON with 4-colours-in-1-LED (5050 RGBW)

  #64 opened a year ago by mankron
  1

• How to set unique id for home assistant

  #63 opened 3 years ago by sidequestboy
  1

• RGBW ledstrip connection

  #62 opened 4 years ago by lodv
  1

• To Run Simple LED from MQTT JSON in ESP32

  #61 opened 4 years ago by ashish-iottive
  0

• MQTT packet size

  #60 opened 5 years ago by jaffons
  3

• Ability to use only white led

  #59 opened 5 years ago by fusionstream
  2

• Adding logarithmic brightness

  #55 opened 6 years ago by Rodrigoah
  0

• *** was not declared in this scope.

  #56 opened 5 years ago by Zibbp
  2

• Configure over wifi using captive portal.

  #57 opened 5 years ago by eb3nezer
  0

• Can this be used with cloud mqtt

  #54 opened 6 years ago by Ameengray
  2

• parseObject() failed

  #53 opened 6 years ago by BramB-1952444
  1

• 4x4 keypad Need Help

  #52 opened 6 years ago by ChevyLover78
  1

• support for arduino ethernet instead of esp8266

  #49 opened 6 years ago by Synth9617
  1

• Home Assistant MQTT JSON light change

  #51 opened 6 years ago by pjmsullivan
  1

• How much power does the ESP8266 use?

  #50 opened 6 years ago by seanspotatobusiness
  0

• Add GPIO input to manually turn the light on and off

  #30 opened 7 years ago by Ryanmaturi
  2

• cant compile

  #45 opened 7 years ago by mefizto
  1

• Research: Using FastLED under the hood

  #42 opened 7 years ago by corbanmailloux
  5

• Way too low brightness

  #10 opened 8 years ago
  14

• adding support for WW/CW led strips

  #44 opened 7 years ago by whiney1
  2

• Expose white channel as a separate light from RGB in Home Assistant

  #37 opened 7 years ago by moskovskiy82
  6

• Add the ability to updates ESP8266 via OTA / OTA Uploading

  #20 opened 8 years ago by ctripodi
  3

• Think about fallback features

  #5 opened 7 years ago by iBobik
  5

• Flash doesn't appear to work if the light was previously switched on using transition

  #34 opened 7 years ago by lolouk44
  0

• Expose the colorfade colors in config.h

  #25 opened 7 years ago by corbanmailloux
  0

• Find a way to extract the effects from the main logic

  #41 opened 7 years ago by corbanmailloux
  0

• Add MQTT_PORT to the configuration

  #33 opened 7 years ago by jebentancour
  1

• Remove extra `const` creations for `CONFIG_*` defines.

  #40 opened 7 years ago by corbanmailloux
  0

• Add config option for toggling the on-board LED

  #39 opened 7 years ago by corbanmailloux
  0

• Rename files to suggest using the unified sketch

  #36 opened 7 years ago by corbanmailloux
  0

• Use conditional defines to remove debugging code

  #26 opened 7 years ago by corbanmailloux
  0

• Merge scripts into one

  #29 opened 7 years ago by r41d
  4

• Plans for development?

  #35 opened 7 years ago by moskovskiy82
  3

• Brightness transitions can overshoot.

  #6 opened 8 years ago by corbanmailloux
  2

• mqtt light (2nd entry) not showing on home assistant

  #32 opened 7 years ago by AAli77
  2

• Feican LED Bulb flashing

  #24 opened 7 years ago by pickeld
  5

• Added inverson function

  #18 opened 7 years ago by linker3000
  1

• White channel support

  #7 opened 7 years ago by 2fat2kidnap
  11

• Resistors used?

  #22 opened 7 years ago by donnib
  1

• Can't get the MQT to work, any ideas ?

  #21 opened 7 years ago by donnib
  1

• Taking #RRGGBB hex string and using it to create the JSON block with decimal values

  #19 opened 8 years ago by linker3000
  2

• Add gamma correction

  #16 opened 8 years ago by makzdot
  2

• Some leds of the strip stop giving lights

  #15 opened 8 years ago by Michelvl92
  1

• Way too low brightness

  #12 opened 8 years ago
  1

• Why there are 2 ino files ?

  #9 opened 8 years ago
  1

• Mosfet

  #8 opened 8 years ago
  4

• Update the brightness example to handle flashing

  #4 opened 8 years ago by corbanmailloux
  1

• Add support for flashing

  #1 opened 8 years ago by corbanmailloux
  1