How to upload Firmware to the Core Flight Tech. B737 ATC?
Please be carefull while uploading. Uploading wrong version can make your device totally useless.
-Close all applications and be sure X-Plane 11 is not running in the background.
-Connect ATC via USB.
-Run Xloader.exe
-Click "Hex File" selection button.
-Find correct .hex file.
-Select device as Duemilanove/Nano(ATmega328).
-Com port is the USB port which ATC Panel connected.
-Check baud rate is 115200 and then upload the hex file.
Important Note: While uploading, never interrupt the communication of the ATC. Otherwise, there is no way to recovery if damaged.
https://coreflighttech.com/product/b737-atc-radio-module/
Any feedback, please leave an e-mail to info@coreflighttech.com