JLC PCB right configuration
kiwisaurio opened this issue · 2 comments
After searching through the internet a lot, I didn't see anyone posting how to properly print the PCB, so I want to ask if this configuration is ok.
Thank you.
It should be changed to the default 1.6mm for the PCB to work properly with screw in stabilizers. 1.2mm can only be used if you make .4mm inserts for your stabilizers, which for this particular build is not worth the trouble. I would also recommend selecting "Yes" for the "Remove Order Number" option. If "No" is selected JLC will silkscreen an order number onto the PCB. Unless a specific location is specified they may place it in an area that may be visible and unsightly on your completed build.
…
On Thu, Jul 2, 2020 at 5:30 PM kiwisaurio @.***> wrote: After searching through the internet a lot, I didn't see anyone posting how to properly print the PCB, so I want to ask if this configuration is ok. Thank you. [image: image] https://user-images.githubusercontent.com/34544227/86410906-f85d6d00-bcbb-11ea-8718-7549a3781d96.png — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#24>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AKJQCCD4S2HBNSRRO7KA7ATRZT37RANCNFSM4OPIHY4A .
Perfect, really appreciate it, if the remaining settings are ok, the build is complete for me. Really thankful ^^