/cs-data-structures

Primary LanguageRubyOtherNOASSERTION

General Assembly Logo

Computer Science: Data Structures

In high-level languages such as Ruby and JavaScript, we don't have to think about exactly where and how to allocate memory for storing things like arrays and hashes, or what algorithms are used to traverse these data structures when we need to find or change a value. These low-level concerns are usually not relevant to modern web development, but knowing the basics is considered a hallmark of a good programmer, and the concepts frequently come up in interview questions.

Since Ruby and JavaScript are the two languages you know best right now, we will be implementing some low-level data structures and algorithms in these languages, even though normally there would be no practical reason to do this. It's important to understand that we are re-inventing the wheel to an extreme degree here.

Prerequisites

Objectives

By the end of this, developers should be able to:

  • Describe a few basic data structures by listing three traits of each
  • Identify the time-complexity of basic operations on each data structure

Preparation

  1. Fork and clone this repository.

Data Structures

For learning about data structures, we'll break into groups, each assigned a particular data structure and set of guiding questions. After group research is complete, we'll compile our notes into a single study guide. Accompanying diagrams may be made on the whiteboard.

Linked Lists

  1. What is a linked list?
  2. What is the time-complexity to search a linked list?
  3. Does it matter whether the list is sorted or not? Why?
  4. Bonus: What is a doubly linked list?
  5. Bonus: What is the time-complexity of insertion? Deletion?

Dictionary

  1. What is an dictionary? When would you use one?
  2. What is the time-complexity to search a dictionary?
  3. What is a hash function?
  4. What is a hash collision?
  5. Bonus: What is the time-complexity of insertion? Deletion?

Tree

  1. What is a tree? When would you use one?
  2. What is a binary search tree?
  3. What is the time-complexity to search a binary tree?
  4. What are some applications of recursion to trees?
  5. Bonus: What is the time-complexity of insertion? Deletion?

Graph

  1. What is a graph? When would you use one?
  2. What is depth-first search? Breadth-first search?
  3. What is the time-complexity to search a graph?
  4. How is a graph different from a tree?
  5. Bonus: What is the time-complexity of insertion? Deletion?

Lab: Implement a Linked List

Low-level arrays (as implemented in C or C++) are contiguous blocks of memory made up of many "cells", each of which contains a value. The one-block-of-memory approach makes accessing arbitrary values fast and easy, but it means that you have to know in advance how many array elements you want. Expanding arrays is an expensive operation that involves reserving a new block of memory and copying all the existing elements into it.

To solve this problem, the linked list was created. Each "value" within a linked list is actually an object that contains two things: the value itself, and a reference to the "next" element in the list. Adding a new element is as simple as reserving the memory space for that element, and pointing the "next" reference of what was previously the last element to the new element.

Implement a LinkedList class in Ruby or JavaScript. Do not implement the list as an array or hash, or any built-in data type. Your class should be capable of the following:

  • Append a new value to the end of the list
  • Prepend a new value to the beginning of the list
  • Find whether a given value is in the list
  • Insert a new value after a given value in the list
  • Remove a given value from the list (warning: tricky!)
  • Find the length of the list
  • Implement to_s or toString to return all values in the list

You may want to create a secondary class to represent the list elements themselves, since each consists of two pieces of data. However, make sure not to expose these objects to the user of your linked list.

Bonus Challenges

These can be attempted in any order; they are not dependent on each other.

  • If you implemented your linked list in JavaScript, implement it in Ruby, or vice-versa.
  • Create a method to iterate through each value in the list. In Ruby you'll need to accept a block and use yield; in JavaScript you'll need to accept a callback function like forEach does on arrays.
  • Create a method that reverses the list. It can either return a new reversed list and leave the existing one alone, or reverse the existing list in-place. Or try doing both!
  • Upgrade your linked list to a doubly-linked list. In this variant of the linked list, each element holds references to both the "next" element and the "previous" element. You may find that it's much easier to remove a specific value from this kind of list.
  • Done-to-death interview question: Suppose you have a linked list that has been "corrupted" such that the links form a loop: if you tried to iterate through it, you'd keep going forever. Devise an algorithm that, given the first element of a linked list, would detect whether the list contains a loop.

Optional Lab: Implement a Stack and a Queue

Stacks and queues are basically variants of the linked list that are optimized for certain operations. Usually all of these operations take O(1) time and space.

The stack typically only supports two operations: push, which adds a new element to the end of the list, and pop, which removes and returns the element at the end of the list. There is no mechanism for getting the length or accessing elements other than the last one. There is sometimes a peek operation, which returns the element at the end of the list without removing it (this doubles as a way to determine whether the stack is empty).

The queue likewise only supports two operations: enqueue, which adds a new element to the beginning of the list, and dequeue, which removes and returns the element at the end of the list. As with the stack, there is no mechanism for getting the length or accessing elements other than the last one.

Implement a Stack and a Queue in Ruby or JavaScript. As before, do not use any of the built-in data types. If you wrote a "linked list element" class for the last exercise, you should be able to reuse it as-is.

Question: What kinds of algorithms or applications would be well-suited to stacks or queues?

Optional Lab: Implement a Binary Tree

Both arrays and linked lists suffer from poor lookup and insertion performance: Finding a specific value, or inserting a new value at an arbitrary position, require O(n) time. Tree data structures, of which the binary tree is one, can improve the performance of these operations (at the expense of others).

Each "value" within a binary tree is actually an object that contains three things: The value itself, and references to a "left" node and a "right" node. The first value inserted into the tree becomes the "root" node. The second value is inserted either to the "left" or the "right" of the root node, depending on how its value compares to the root node's value. Subsequent values are likewise inserted to the left or right of some existing node in the tree based on value comparisons.

Note that this algorithm requires all values inserted into the tree to be unique and comparable: for any given value, you should be able to say for sure that it is either "less than" or "greater than" any other value. If you have duplicate values, or your values are of different types (e.g. strings and integers) or otherwise cannot be compared, they cannot be stored in a binary tree.

Implement a BinaryTree class in Ruby or JavaScript. As before, do not use any of the built-in data types. Your class should be capable of the following:

  • Add a new value to the tree
  • Find whether a given value is in the tree
  • Remove a given value from the tree (warning: tricky!)
  • Implement to_s or toString to return all values in the tree

Bonus Challenges

These can be attempted in any order; they are not dependent on each other.

  • Create a method to iterate through each value in the tree. In Ruby you'll need to accept a block and use yield; in JavaScript you'll need to accept a callback function like forEach does on arrays.
  • Upgrade your binary tree to a hash tree: instead of storing only a value for each node, store a key as well. Perform insertions and deletions based on the key, and add a method to retrieve the value associated with a key. (This might remind you of the built-in Hash class in Ruby. This is how some other languages implement hashes, but Ruby does it using a non-tree data structure called a hash table.)
  • Note that if the values inserted into the tree go in one "direction" much more frequently than another (e.g. they all go to the "left"), the tree can become "unbalanced". A completely unbalanced tree performs no better than a linked list. In this case we want to "rebalance" the tree, that is, rearrange its nodes to minimize the number of connections needed to access any given node. How might we do this?

Additional Resources

License

  1. All content is licensed under a CC­BY­NC­SA 4.0 license.
  2. All software code is licensed under GNU GPLv3. For commercial use or alternative licensing, please contact legal@ga.co.