Requirements

Python >= 3.8

What is netprobify?

netprobify is a tool to probe destinations using various protocols/methods.

Using scapy makes the tool easy to extend as well as adding new kinds of probe.

The tool is designed to scale by using multiprocessing.

Also as it uses scapy, no sockets are actually opened.

Usecases

At Criteo, netprobify is used to provide metrics to all services provided by the network teams: datacenter, WAN, internet.

For example:

datacenter: we probe all of our Top of Racks using UDPunreachable probing mode
WAN: full mesh between our datacenters in TCPsyn probing mode
internet: probing common and strategic targets using TCPsyn, UDPunreachable, ICMPping

How to use netprobify

How to run it

To run netprobify you can:

run sudo netprobify_start.py from the source code
or build a PEX and use it (see details in How to build section below)

If you are willing to run it in production, the use of "stable" branch is recommended.

How to configure it

To configure netprobify, you need to add a netprobify.yaml configuration file.

All the details regarding the configuration can be found in netprobify/schema_config.yaml.

You can find a quick example below:

---
global:
  probe_name: "lab"
  interval: 30
  nb_proc: 8
  verbose: 0
  logging_level: INFO
  prometheus_port: 8000
  dns_update_interval: 300
  reload_conf_interval: 0

groups:
  standard:
    src_port_a: 65100
    src_port_z: 65199

targets:
  google_ipv4:
    description: "google_search"
    type: "TCPsyn"
    destination: "google.com"
    address_family: "ipv4"
    dst_port: 443
    nb_packets: 100
    timeout: 1
  google_ipv6:
    description: "google_search"
    type: "TCPsyn"
    destination: "google.com"
    address_family: "ipv4"
    dst_port: 443
    nb_packets: 100
    timeout: 1
  bing:
    description: "bing_search"
    type: "TCPsyn"
    destination: "bing.com"
    dst_port: 443
    nb_packets: 100
    timeout: 1

Then, you just have to scrape the result using Prometheus. In this example, you will need to scrape the host on port 8000.

Prometheus basic authentication

For security purposes, netprobify can secure /metrics endpoint using HTTP basic authentication. To set this up, you need to add PROM_USER and PROM_PASSWORD environment variables.

Prometheus alerts rules

You will find below example of Prometheus alerts rule for netprobify.

Raise an alert when loss ratio is above 0.1%:

tcpsyn_loss_ratio{probe_name="lab"} * 100 > 0.1

Same but only if the probe is actually sending packets:

tcpsyn_loss_ratio{probe_name="lab"} * 100 > 0.1 and on(probe_name) sum by(probe_name) (increase(tcp_syn_sent_total,probe_name="lab"}[10m])) > 0

Raise an alert if the latency is above 100 millisecond:

tcpsyn_round_trip_seconds{probe_name="lab",percentile="95"} * 1000 > 100

Raise an alert if the probe is taking too long to probe all the targets (more than 90 seconds):

app_iteration_time_seconds{probe_name="lab"} > 90

Raise an alert if netprobify is not running (or not scraped by Prometheus):

up{instance=~"lab",job="netprobify"} == 0

Raise an alert if the probe is not sending any TCPsyn packets:

sum by(probe_name) (increase(tcpsyn_sent_total{probe_name="lab"}[10m])) == 0

Raise an alert if the probe reloaded with a bad configuration:

app_reload_conf_failed_status{probe_name="lab"} > 0

Grafana examples

How to build

During developement phase

Create a virtualenv to avoid that local packages clash with your system
- python3 -m venv .venv
- source .venv/bin/activate
Once in your venv, install all the dependencies
- pip install -r requirements/netprobify.txt
- pip install -r requirements/tests.txt
- pip install -e .
Run your program
- sudo netprobify

How to run the tests

Run the command tox. It will run tests, code coverage, linter for python3.

Build an executable

Get out of your virtualenv by running in your shell
- deactivate
Run the command tox -e bundle. It will build the pex
You will find your executable in dist/netprobify

Architecture

Workflow

Probes

netprobify can probe a host using an IP address, or a hostname, or a subnet. However, pinging a subnet will aggregate the results, and not expose metrics by hosts.

If a hostname is used to define the probe, the DNS resolution will be done at the interval defined in the config file (global or in the target definition).

All probes type can be specified with payload size.

TCPsyn

This probe is using the TCPsyn stealth:

send a TCP SYN
wait for a response (TCP SYN or ICMP)
send a TCP RST to close the connection
calculate the latency between the TCP SYN and the first response.

To avoid collision, a seq id is defined using a global counter. That way, even if a target is defined twice and run at the same time, the tool will be able to match the response packets with the good sent packet.

ICMP

This probe is using ICMP echo request. It is a basic ping.

UDPunreachable

UDPunreachable probe goal is to target an UDP closed port. It waits for an ICMP Destination Unreachable (Port unreachable).

It can be useful to target network devices when TCPsyn stealth doesn't work. The interest compared to ICMP, is that UDP is using ECMP by changing the source port.

To avoid collision, a unique ID parameter is setup at the IP level for each packets sent.

It works out of the box on Arista and Juniper devices.

If you are targeting another devices, you should make sure there is no rate-limit applied to ICMP Destination Unreachable.

By default, on linux:

icmp_ratemask = 6168
icmp_ratelimit = 1000

You can either deactivate completely the rate-limit, or simply deactivate the rate-limit for ICMP Destination Unreachable.

To do so, you just have to set icmp_ratemask to 6160.

More details about icmp_ratemask:

icmp_ratemask - INTEGER Mask made of ICMP types for which rates are being limited. Significant bits: IHGFEDCBA9876543210 Default mask: 0000001100000011000 (6168)

Bit definitions (see include/linux/icmp.h):
	0 Echo Reply
	3 Destination Unreachable *
	4 Source Quench *
	5 Redirect
	8 Echo Request
	B Time Exceeded *
	C Parameter Problem *
	D Timestamp Request
	E Timestamp Reply
	F Info Request
	G Info Reply
	H Address Mask Request
	I Address Mask Reply

source: https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt

Group notion

A group has several parameters. The most important ones are:

src_port_a
src_port_b

Together, they define a range. For each TCPSyn target associated to a group, packets will be generated. The number of packets sent per group is configured via nb_packets parameter in the target definition. It will change the source port for each packet by using round robin in the range define in the group.

By default, all targets are associated to all groups. But you can change this behavior with parameters in config.yaml

groups: permit_target_auto_register
- default: true
- if false, the targets will not automatically be in the group
targets: auto_register_to_groups
- default: true
- if false, the target will not be automatically in any group
targets: explicit_groups/register_to
- default: none
- explicity associate a target to a group even if permit_target_auto_register is set to false
targets: explicit_groups/exclude_from
- default: none
- explicity remove the target from a group (useful when permit_target_auto_register is set to true)

Threshold

The thresholds are exposed in prometheus with the right label, so you can match it with a metric and then create an alert.

The value unit must match the metric you want to monitor.

Example:

Latency in seconds
Loss in percentage

Example of Prometheus alert using the threshold metrics:

Raise an alert if the latency is above the threshold defined in the netprobify configuration file:

tcpsyn_round_trip_seconds{probe_name="lab",percentile="95"} * 1000 > on(destination, probe_name) threshold{alert_level="paging",type="latency"} * 1000`

Dynamic inventories

Dynamic inventories are custom modules loaded automatically. The goal is to set dynamically targets based on dynamic sources such as a CMDB, an API etc...

To load a dynamic inventory, you have to add a Python module in the dynamic_inventories directory.

The module must contain a "start" method with the following parameters:

targets: dict shared among all processes (main process and dynamic inventories) Each modules should register its targets in "targets[module_name]" The minimal targets parameters are defined in schema_config.yaml
module_name
logging_level

All modules are started only at the netprobify startup in a dedicated subprocess. So, you may want the module to have an infinite loop.

Other parameters

All parameters are defined and described in schema_config.yaml

Known limitations

BPF filters on IPv6 upper-layer protocols

Due to an inherited limitation from libpcap (see the-tcpdump-group/libpcap#600), netprobify is not able to filter a specific subset of TCP and UDP packets. This will impact performance, especially when you receive real traffic from a target you try to probe: netprobify will also receive this traffic and will have to do more work to identify traffic related to probing (which could lead to false results).

criteo/netprobify