Python example library for Crystalfontz FTDI/BridgeTek EVE graphic accelerators.
This library is currently aimed at using EVE based display modules with Raspberry Pi computers.
Crystalfontz EVE displays can viewed/purchased on the Crystafontz EVE Accelerated TFT Displays webpage.
A list of the displays supported by this library are here in the module support document.
Please consider this library to be a work-in-progress. Some EVE features are not yet supported, and interfaces for other host computer systems will be added at a later date.
Example connection guide using a Crystalfontz EVE breakout board (CFA10098)
| Raspberry Pi Header Pin | CFA10098 Pin | Connection Description |
|---|---|---|
| 1 | +3.3V | 3.3V Supply to the EVE Module |
| 6 | GND | Power ground to the EVE Module |
| 19 | MOSI | SPI MOSI |
| 20 | GND | Power ground to the EVE Module |
| 21 | MISO | SPI MISO |
| 23 | SCLK | SPI SCLK |
| 24 | CS | SPI Chip Select |
| 29 | INT | EVE Interrupt |
| 31 | PD | EVE Power-Down / Reset |