cubiq/PuLID_ComfyUI

Issues

• <img width="971" alt="123123123" src="https://github.com/cubiq/PuLID_ComfyUI/assets/125015943/5890a69f-4324-4d66-ac35-9c8ecf5a638f">

  #66 opened 3 months ago by chaohuei2020
  1

• Add positive and negative input in ApplyPulid node

  #64 opened 3 months ago by huan085128
  1

• xFormers wasn't build with CUDA support

  #26 opened 6 months ago by capoz1o
  3

• Hello developer, do you have any plans to develop PuLID that can be used with FLUX? I feel like it's going to be a milestone in the history of AI painting.

  #65 opened 3 months ago by zdwork2020
  3

• An error happened while trying to locate the file on the Hub and we cannot find the requested files in the local cache. Please check your connection and try again or make sure your Internet connection is on.

  #17 opened 7 months ago by mcyyx1
  2

• IMPORT FAILED

  #23 opened 6 months ago by mr-bob-chang
  22

• I have re-uploaded all the models, but the error still persists. This issue has been troubling me for over a month.

  #63 opened 4 months ago by reghost111
  0

• No face found bypass feature request

  #62 opened 4 months ago by DJZeroAction
  1

• Failed downloading antelopev2 zip

  #49 opened 4 months ago by Eranio-bit
  4

• expected 0 arguments, got 1

  #61 opened 4 months ago by daxiazhou
  0

• All assemblies are installed, but ...

  #60 opened 4 months ago by iovart
  0

• Load Eva Clip error

  #59 opened 4 months ago by gghuanhuan
  0

• Model Path Problem

  #57 opened 4 months ago by 807502278
  3

• Hope to support multiple image inputs

  #16 opened 7 months ago by garbe-github-support
  2

• Unable to automatically download model

  #45 opened 6 months ago by wuxianghanren
  3

• Please 'pip install apex' prompt on console after installation

  #55 opened 4 months ago by Shingkyo
  5

• After installing and downloading various models, each node displays normally, but the ApplyPulid node reports an error during runtime。Error occurred when executing ApplyPulid:

  #36 opened 6 months ago by lzhfdwu007
  6

• AttributeError: 'ModelPatcher' object has no attribute 'get_model_object'

  #56 opened 4 months ago by hong2610
  2

• (IMPORT FAILED) PuLID_ComfyUI

  #29 opened 6 months ago by Amaru-Zeas
  2

• Error on MacOS M2

  #54 opened 5 months ago by lisiyizu
  2

• Error on MacOS

  #41 opened 5 months ago by 109km
  17

• Error occurred when executing PulidInsightFaceLoader

  #27 opened 6 months ago by MrsHorrid
  4

• Error occurred when executing ApplyPulid, What should I do?

  #53 opened 5 months ago by lisiyizu
  1

• An error occurred at the applly pulid node. What should I do?

  #46 opened 6 months ago by chaohuei2020
  2

• Error occurred when executing PulidEvaClipLoader

  #52 opened 5 months ago by Lafko
  0

• Ksampler issue

  #37 opened 6 months ago by Hushwink
  2

• Error PulidEvaClipLoader: Consistency check failed: file should be of size 856461210 but has size 28449231 ((…)P_L_336_psz14_s6B.pt).

  #51 opened 5 months ago by hong2610
  2

• 无法稳定下载EVA02_CLIP_L_336_psz14_s6B，手动下载后如何存放在huggingface的目录中

  #31 opened 6 months ago by midweek1981
  3

• Error occurred when executing ApplyPulid: unexpected EOF, expected 5572617 more bytes. The file might be corrupted.

  #38 opened 6 months ago by XTRMsavage
  4

• import failed error, nodes are not loading

  #44 opened 6 months ago by MojoJojo111
  3

• An issue with style degradation

  #40 opened 6 months ago by onefish51
  1

• Dear programmer, can you develop the comfyui version of the Face-Adapter project, which is a powerful personalized ID project, if you can, I will sponsor it

  #43 opened 6 months ago by rwywenyi
  1

• Exception during processing!!! 'Attn2Replace' object has no attribute 'set_new_condition'

  #42 opened 6 months ago by satangel2222
  1

• RuntimeError: unexpected EOF, expected 10465 more bytes.

  #22 opened 6 months ago by guge2772135136
  1

• 大佬能不能移植一下这个：https://github.com/tyxsspa/AnyText，到comfyui，这么好一个项目怎么没人弄呢，生成文字不是挺刚需的嘛。

  #39 opened 6 months ago by 602387193c
  1

• missing nodes

  #34 opened 6 months ago by lunatico67
  1

• Used with ipadapter, the order before and after causes differences

  #33 opened 6 months ago by zhangsdly
  1

• CLI mode

  #32 opened 6 months ago by self-destruction
  1

• Error occurred when executing IPAdapterAdvanced: 'Attn2Replace' object has no attribute 'set_new_condition'

  #28 opened 6 months ago by djm1231
  1

• IPAdapter Issue

  #25 opened 6 months ago by Marcusstory79
  1

• The function def hack_unet_attn_layers(self, unet) in the PuLID source code is not reflected in comfyui-PuLID

  #24 opened 6 months ago by rwywenyi
  1

• The custome node is worse than origin PuLID

  #15 opened 7 months ago by rwywenyi
  3

• The issue with the final decoding step of Pulid

  #20 opened 7 months ago by dh9527
  2

• Comfyui Import Failed

  #21 opened 7 months ago by moviejimmy
  1

• An error happened when run PuLID_IPAdapter_style_transfer.json

  #19 opened 7 months ago by wayhow123
  2

• Something wrong with the PulID excution when adding IPAdapter

  #18 opened 7 months ago by kelvinyoung
  1

• I tried it with ipa's style migration and it works fine, but it's so slow, what's the reason?

  #13 opened 7 months ago by jokero3answer
  3

• RuntimeError: Expected size for first two dimensions of batch2 tensor to be: [2, 1280] but got: [2, 640].

  #14 opened 7 months ago by daidongzhe
  2

• sourcing Antelopev2.zip

  #12 opened 7 months ago by friendlyFriend4000
  0

• The difference result between PuLID_ComfyUI and official gradio demo

  #11 opened 7 months ago by rwywenyi
  9