REQUIEREMENTS:
- Raspberry Pi Zero W
- WaveShare 2.13 ink screen V2.
- PiSugar2 battery.
- 16 GB microSD Card high performance.
CONNECT TO A WIFI NETWORK
EASY WAY
* sudo apt install git
* git clone https://github.com/curly60e/pyblockmicro.git
* cd pyblockmicro
* sudo sh first.sh
* sudo raspi-config
- Set autologin to ON
- Reboot
MANUAL WAY
* sudo apt install git
* git clone https://github.com/curly60e/pyblockmicro.git
* cd pyblockmicro
* sudo apt update
* sudo apt upgrade
* sudo apt install tor
* sudo apt remove python3-pip python-pip
* sudo apt install python3-pip
* sudo apt install libopenjp2-7 libtiff5
* sudo raspi-config
- Interfacing Options -> SPI -> Yes
- Set autologin to ON
- Reboot
* sudo apt install ttf-mscorefonts-installer
* sudo apt install git
* git clone https://github.com/curly60e/pyblockmicro.git
* cd pyblockmicro
* sudo pip3 install -r requirements.txt
* sudo cp torrc /etc/tor/
* sudo cp .bashrc /home/pi/
* sudo cp clocks.py /home/pi/
* sudo cp -r .git/ /home/pi/
* sudo cp papertty.service /etc/systemd/system
* sudo cp start.sh /home/pi/
* cd /home/pi/
* sudo chown root:root start.sh;sudo chmod 700 start.sh
* sudo systemctl daemon-reload
* sudo systemctl enable papertty
* sudo systemctl start papertty
Setup PiSugar2 Battery (OPTIONAL)
* curl http://cdn.pisugar.com/release/Pisugar-power-manager.sh | sudo bash
* sudo reboot
Mobile Phone tethering to your PyBLOCK micro over Bluetooth ONLY ANDROID.
* sudo apt-get install bluetooth bluez-utils bluez-compat
* sudo apt install python-dbus
* git clone https://github.com/WayneKeenan/RaspberryPi_BTPAN_AutoConnect.git
* sudo nano /etc/dhcpcd.conf
--- Add these lines ---
interface bnep0
static ip_address=192.168.44.49/24
static routers=192.168.44.1
static domain_name_servers=192.168.44.1
--- Save and Exit ---
* cd RaspberryPi_BTPAN_AutoConnect
* nano check-and-connect-bt-pan.sh
--- Edit the MAC address line and put your phone's MAC address ---
BT_MAC_ADDR=YOURPHONESADDRESS
--- Save and Exit ---
* sudo nano /etc/systemd/system/btpan.service
--- Create a Bluetooth service so it can start automatically on every boot and put these lines ---
[Unit]
Description=BtPan
DefaultDependencies=no
[Service]
Type=simple
KillSignal=SIGINT
TimeoutStopSec=8
Restart=on-failure
### Change the paths below to match yours
WorkingDirectory=/home/pi/
ExecStart=/home/pi/startbt.sh
###
[Install]
WantedBy=sysinit.target
--- Save and Exit ---
* sudo systemctl daemon-reload
* sudo systemctl enable btpan.service
* sudo systemctl start btpan.service
* sudo nano /home/pi/startbt.sh
--- Create a bash script to execute the service on every boot ---
#!/bin/sh
## Put your options here - the service unit will run this script, so that
## you don't need to 'daemon-reload' every time you want to change settings.
##
## It's a good idea to allow only root to write to this file:
##
## sudo chown root:root check-and-connect-bt-pan.sh; sudo chmod 700 check-and-connect-bt-pan.sh
##
/home/pi/bin/check-and-connect-bt-pan.sh
--- Save and Exit ---
START YOUR MOBILE PHONE BLUETOOTH AND ALLOW INTERNET TETHERING OVER BLUETOOTH
ON YOUR RPI TYPE...
* sudo chown root:root check-and-connect-bt-pan.sh; sudo chmod 700 check-and-connect-bt-pan.sh
* sudo chown root:root startbt.sh; sudo chmod 700 startbt.sh
* sudo bluetoothctl
* [bluetooth]# scan on
* --- Search for your Phone MAC address ---
* [bluetooth]# pair YOURPHONEMACADDRESS
* [bluetooth]# trust YOURPHONEMACADDRESS
* [bluetooth]# exit
* sudo reboot"
DONATE PYBLOCK
Samourai Wallet Paynym:
Lightning KeySend:
Monero:
