/basic_verilog

Must-have verilog systemverilog modules

Primary LanguageVerilog

basic_verilog

Some basic must-have verilog modules

(licensed under CC BY-SA 4_0)

Author: Konstantin Pavlov, pavlovconst@gmail.com

CONTENTS:

  • /Advanced Synthesis Cookbook/ - useful code from Altera's cookbook

  • /KCPSM6_Release9_30Sept14/ - Xilinx's Picoblaze soft processor

  • /pacoblaze-2.2/ - version of Picoblaze adapted for Altera devices

  • /scripts/ - useful TCL scripts

  • /scripts/allow_undefined_ports.tcl - allows generation of test projects with undefined pins for Vivado IDE

  • /scripts/compile_quartus.tcl - boilerplate script for commandline project compilation in Quartus IDE

  • /scripts/convert_sof_to_jam.bat - Altera/Intel FPGA configuration file converter

  • /scripts/convert_sof_to_rbf.bat - another Altera/Intel FPGA configuration file converter

  • /scripts/iverilog_compile.tcl - complete script to compile Verilog sources with iverilog tool and run simulation in gtkwave tool

  • /scripts/modelsim_compile.tcl - Modelsim no-project-mode compilation script

  • /scripts/post_flow_quartus.tcl - custom reporting or report analisys for Intel Quartus IDE

  • /scripts/post_flow_vivado.tcl - custom reporting or report analisys for Xilinx Vivado IDE

  • /scripts/program_all.bat - command line programmer example for Altera/Intel FPGAs

  • /scripts/project_version_auto_increment.tcl - project version autoincrement script for Quartus IDE

  • /scripts/quartus_system_console_init.tcl - initialization script for reading/writing Avalon-MM through JTAG-to-Avalon-MM bridge IP

  • /scripts/set_project_directory.tcl - changes current directory to match project directory in Vivado IDE

  • /scripts/write_avalon_mm_from_file.tcl - writing bulk binary data from binary file to Avalon-MM through JTAG-to-Avalon-MM bridge IP

  • main_tb.sv - basic testbench template

  • ActionBurst - multichannel one-shot triggering module

  • ActionBurst2 - multichannel one-shot triggering with variable steps

  • adder_tree - adding multiple values together in parallel

  • bin2gray - combinational Gray code to binary converter

  • bin2pos - converts binary coded value to positional (one-hot) code

  • clk_divider - wide reference clock divider

  • debounce - two-cycle debounce for input buttons

  • delay - VERY USEFUL MODULE to make static delays or to synchronize across clock domains

  • dynamic_delay - dynamic delay for arbitrary input signal

  • edge_detect - combinational edge detector, gives one-tick pulses on every signal edge

  • encoder - digital encoder input logic module

  • fifo - single-clock FIFO buffer (queue) implementation

  • gray2bin - combinational binary to Gray code converter

  • leave_one_hot - combinational module that leaves only lowest hot bit

  • lifo - single-clock LIFO buffer (stack) implementation

  • NDivide - primitive integer divider

  • pos2bin - converts positional (one-hot) value to binary representation

  • pos2bin - converts positional (one-hot) value to binary representation

  • prbs_gen_chk - PRBS pattern generator or checker

  • pulse_gen - generates pulses with given width and delay

  • pulse_stretch - configurable pulse stretcher/extender module

  • reset_set - SR trigger variant w/o metastable state, set dominates here

  • reverse_bytes - reverses bytes order within multi-byte array

  • reverse_vector - reverses signal order within multi-bit bus

  • set_reset - SR trigger variant w/o metastable state, reset dominates here

  • spi_master - universal spi master module

  • UartRx - straightforward yet simple UART receiver implementation for FPGA written in Verilog

  • UartTx - straightforward yet simple UART transmitter implementation for FPGA written in Verilog

  • UartRxExtreme - extreme minimal UART receiver implementation for FPGA written in Verilog

  • UartTxExtreme - extreme minimal UART transmitter implementation for FPGA written in Verilog

Also added testbenches for selected modules