cyberman54/ESP32-Paxcounter

Issues

• SDS011 seems to only generate one reading and then returns 0 for all following readings

  #1004 opened 2 months ago by proffalken
  18

• IAQ status via LED / ws2812b

  #977 opened a year ago by Tomi05-k
  1

• Crash when running on TTGOV2 (TCXO version)

  #1005 opened a month ago by nachoplus
  6

• No connection to lorawan

  #1007 opened 2 months ago by Edd77
  8

• MAC Address Randomization

  #1006 opened 2 months ago by Timmwardion
  2

• GPS not starting and BME680 not sending data on Lilygo v2.1 New

  #1003 opened 3 months ago by proffalken
  20

• About LilyGo v1.x

  #1001 opened 3 months ago by Neogene
  3

• Are the pins on the LILYGO Paxcounter LoRa v2.1_1 broken out in such a way that sensors can be used?

  #1000 opened 4 months ago by proffalken
  2

• Endian Encoding wrong: BMExxx Temperature in Mode PAYLOAD_ENCODER == 2

  #994 opened 5 months ago by commeco
  6

• ttgov21new.h whant the 433mhz settings

  #992 opened 6 months ago by uglurass
  1

• Hardware support for T-Beam V1.2 with AXP2101

  #990 opened 8 months ago by XAct-6510
  9

• Heltec v3 Support

  #989 opened 8 months ago by KalitheBirb
  1

• TTNV3 has no Converter og Decoder page

  #988 opened 9 months ago by JensBovbjergdk
  1

• [Refactoring] simplify OTA update code using HTTPUpdate lib

  #986 opened 10 months ago by cyberman54
  0

• LoPy4 Fails to join LoRa network (TTN & North) unless for SF7

  #981 opened a year ago by markwaters306
  4

• BLE Scanner not working on v3.6.0 on TTGO LoRa

  #978 opened a year ago by littlecxm
  2

• question: what about high numbers?

  #971 opened a year ago by AugustQu
  3

• Supported LED Matrix display

  #969 opened a year ago by cgruber-sdc
  2

• Counter mode cyclic and cumulative in parallel?

  #973 opened a year ago by ClemensGruber
  1

• Ratio measured WiFi devices vs. Bluetooth devices

  #974 opened a year ago by ClemensGruber
  1

• Counting unique people with more than one pax counter?

  #972 opened a year ago by ClemensGruber
  1

• #define HAS_RTC MY_DISPLAY_SDA, MY_DISPLAY_SCL // SDA, SCL does not work for #if (...

  #956 opened a year ago by TomRottler
  2

• Migrate BME680 sensor code to newer BSEC2 lib

  #942 opened a year ago by cyberman54
  2

• TTN Time Sync

  #948 opened a year ago by MichaelJumble
  3

• lilygo esp paxcounter module. trying to build. but ....

  #940 opened a year ago by mayday77
  7

• Getting issue when trying to upload onto TBeamV1.1

  #937 opened a year ago by aero-oli
  1

• Won't compile

  #929 opened a year ago by FrankHovis
  1

• Build error 'ONE_BIT_DISPLAY' does not name a type; did you mean 'HAS_DISPLAY'?

  #924 opened a year ago by joaquinpolom
  4

• BLE Scanner not working on Build 3.4.3 ? (TTGO LORA OLED BOARD 1.6.1)

  #921 opened a year ago by Qmick01
  32

• Unable to build, missing EEPROM.h & missing reset_reasons.h

  #895 opened 2 years ago by t-huyeng
  2

• screen not working on heltec v2,1

  #882 opened 2 years ago by luigi20000
  4

• Make a USB stick version (without Lora) of paxcounter using new ESP32 S3 USB Device API

  #877 opened 2 years ago by heaversm
  11

• Add support for reporting over the Helium network

  #878 opened 2 years ago by DeflateAwning
  6

• Bootloop with ttgo_lora32_v21new

  #876 opened 2 years ago by hekopath
  1

• PaxCounter's signal strengh very low

  #875 opened 2 years ago by paddlix
  4

• Invalid head of packet (0x46): Possible serial noise or corruption

  #872 opened 2 years ago by heaversm
  1

• Pax counter showing zero

  #865 opened 2 years ago by MaddogPOW
  1

• Failed to submit package: ...MyPaxexpressUser/MyPaxexpressRepo...

  #873 opened 2 years ago by heaversm
  3

• what if you don't want to use paxexpress

  #871 opened 2 years ago by heaversm
  2

• possible dependency issue in i2c.cpp

  #870 opened 2 years ago by doebi
  4

• SDS011 sensor + TTGOV1.6 LoRa issue on all pin except 19&23

  #868 opened 2 years ago by FabTangi
  1

• Does not work on ESP32 Paxcounter LoRa32 T3 V1.6.1

  #858 opened 2 years ago by SmurfettesBrother
  22

• SDS011 sensor + TTGOV1.6 LoRa issue

  #866 opened 2 years ago by FabTangi
  6

• PaxCounter transmit power not changeable

  #860 opened 2 years ago by paddlix
  1

• Cant turn off sleep cycle (without factory reset)

  #859 opened 2 years ago by JMyrng
  3

• M5core LMIC failure

  #857 opened 2 years ago by davcx
  2

• No data since TTNv3

  #843 opened 2 years ago by grahamrobertslx
  1

• wrong Payload in TTNv3

  #844 opened 2 years ago by ChrSchultz
  6

• OLED screen initialization failed causing reboot (solved)

  #841 opened 2 years ago by LilyGO
  2

• Buy paxcounter amazon but Display is reverse, how to solve?

  #837 opened 2 years ago by opabert
  1