/hwprobe

RISC-V hwprobe exmaple

Primary LanguageC

RISC-V hwprobe Example

This example demonstrates how to use the hwprobe syscall to probe hardware features of the RISC-V processor in Linux.

How to use?

  1. Compile the example program:
gcc -o hwprobe hwprobe.c

If it failed due to missing .h or some extension is not in the header files, you should use the builtin hwprobe.h as a workaround:

gcc -o hwprobe hwprobe.c -I./include
  1. Run the program:
$ ./hwprobe
MVENDORID: 0
MARCHID: 0
MIMPID: 0
BASE_BEHAVIOR: IMA_
IMA_EXT_0: FD_C_V_Zba_Zbb_Zbs_
CPUPERF_0: MISALIGNED-FAST_
ZICBOZ_BLOCK_SIZE: 64 Bytes

Creating portable binary with hwprobe + ifunc

We provided an example of creating a portable binary that uses rv64gc as the binary base and uses function attribute arch=+zbb to enable the Zbb extension for some specific function in the ./ifunc_exmaple. The ifunc is used to select the correct function and store it in the GOT table so there is no runtime overhead except for inline support. We will use hwprobe syscall to query if the zbb extension is supported during ifunc resolve function.

There is no lto support in the mainline GCC, if you enable -flto in CFLAG you will see the following error:

➜  ifunc_example git:(master) ✗ make CROSS_COMPILE=riscv64-unknown-linux-gnu- CFLAGS='-static -O3 -march=rv64gc -flto'
riscv64-unknown-linux-gnu-gcc -static -O3 -march=rv64gc -flto -c -o ror32.o ror32.c
riscv64-unknown-linux-gnu-gcc -static -O3 -march=rv64gc -flto -c -o riscv_portable.o riscv_portable.c
riscv64-unknown-linux-gnu-gcc -static -O3 -march=rv64gc -flto -c -o ror32_main.o ror32_main.c
riscv64-unknown-linux-gnu-gcc -static -O3 -march=rv64gc -flto -o ror32_main ror32.o riscv_portable.o ror32_main.o
/tmp/ccsIGdZF.s: Assembler messages:
/tmp/ccsIGdZF.s:14: Error: unrecognized opcode `rorw a0,a0,a1', extension `zbb' or `zbkb' required
lto-wrapper: fatal error: riscv64-unknown-linux-gnu-gcc returned 1 exit status
compilation terminated.
/opt/riscv/lib/gcc/riscv64-unknown-linux-gnu/15.0.0/../../../../riscv64-unknown-linux-gnu/bin/ld: error: lto-wrapper failed
collect2: error: ld returned 1 exit status
make: *** [Makefile:7: ror32_main] Error 1

Maybe it should be fixed in the future.

Reference: