PJON-cython
Call the PJON C++ library directly from Python 2 or Python 3 (via Cython)
PJON (Github: PJON ) is an open-source, multi-master, multi-media (one-wire, two-wires, radio) communication protocol available for various platforms (Arduino/AVR, ESP8266, Teensy).
PJON is one of very few open-source implementations of multi-master communication protocols for microcontrollers.
PJON-cython vs PJON-python
PJON-cython allows you to use the C++ PJON library from Python via Cython (C++ wrappers for Python) while PJON-python is a re-implementation of the PJON protocol in Python
Current status:
Support for PJON 11.2 only and the following strategies :-
- LocalUDP
- GlobalUDP
- ThroughSerial
- ThroughSerialAsync new
Note
- PJON-cython versions are aligned with PJON versions to indicate compatibility with C implementation for uC platforms.
Python support
Python 2.7, 3.4, 3.5 and 3.6 are tested and considered supported
Platform support
Linux and Mac OS X are considered supported. Windows is not supported (sorry!).
Install from pip
Current version is 11.2.0
pip install pjon-cython
Testing
$(which python) setup.py nosetests --with-doctest --doctest-extension=md
GlobalUDP example
>>> import pjon_cython as PJON
>>> class GlobalUDP(PJON.GlobalUDP):
... # you can overload __init__ if you want
... def __init__(self, device_id):
... PJON.GlobalUDP.__init__(self, device_id)
... self.packets_received = 0
... def receive(self, data, length, packet_info):
... print ("Recv ({}): {}".format(length, data))
... print (packet_info)
... self.packets_received += 1
... self.reply(b'P')
>>> g = GlobalUDP(44)
>>> idx = g.send(123, b'HELO')
>>> # calling loop calls the PJON bus.update() and bus.receive()
>>> # and the return is the results of those functions -
>>> packets_to_send, receive_status = g.loop()
>>> # packets_to_send is the Number of packets in the PJON buffer
>>> packets_to_send
1
>>> #PJON constants are available too
>>> receive_status == PJON.PJON_FAIL
True
>>> # When you're done with your PJON interface, you can cleanup the connection by deleting it
>>> del g
Through Serial example
>>> import pjon_cython as PJON
>>> #ThroughSerial Example
>>> # Make sure you set self.bus.set_synchronous_acknowledge(false) on the other side
>>>
>>> class ThroughSerial(PJON.ThroughSerial):
...
... def receive(self, data, length, packet_info):
... if data.startswith(b'H'):
... print ("Recv ({}): {} - REPLYING".format(length, data))
... self.reply(b'BONZA')
... else:
... print ("Recv ({}): {}".format(length, data))
... print ('')
...
>>> # Put your actual serial device in here...
>>> ts = ThroughSerial(44, b"/dev/null", 115200)
>>> # Send returns the packet's index in the packet buffer
>>> ts.send(100, b'PING 1')
0
>>> ts.send(100, b'PING 2')
1
>>> # Error handling happens through exceptions such as PJON.PJON_Connection_Lost
>>> while True:
... packets_to_send, receive_status = ts.loop()
Traceback (most recent call last):
...
PJON_Connection_Lost
Setting configurable properties
>>> import pjon_cython as PJON
>>> class GlobalUDP(PJON.GlobalUDP):
... def receive(self, data, length, packet_info):
... print ("Recv ({}): {}".format(length, data))
>>> # GlobalUDP and LocalUDP both support set_port to configure their UDP listening port
>>> g = GlobalUDP(99, 8821)
>>> del g
>>> #They return the class object, so you can "chain them"
>>> pjon = GlobalUDP(100,8821).set_autoregistration(False)
>>> pjon # doctest: +ELLIPSIS
<GlobalUDP object at 0x...>
>>>
>>> # These options affect packet overhead (in bytes)
>>> pjon.packet_overhead()
6
>>> pjon.set_crc_32(True).packet_overhead()
9
>>> pjon.set_packet_id(True).packet_overhead()
11
>>> pjon.set_synchronous_acknowledge(True).packet_overhead()
11
>>> pjon.set_packet_id(False).set_asynchronous_acknowledge(False).packet_overhead()
9
>>> pjon.set_crc_32(False).include_sender_info(False).packet_overhead()
5
pyserial_Asyncio
Use serial based strategies withInstead of passing a serial port string, you can pass a file descriptor to the ThroughSerial and ThroughSerialAsync methods which allows other libraries to poll the serial port.
For examples, see the reticul8 project.