Tandy 1000 HX, RL, RLX & RSX Internal Gotek Adpater
This Tandy 1000 Internal Gotek Adapter allows you to use Gotek Virtual Floppy Drives with the Tandy 1000 HX which sends power over the Floppy cable and uses a non-standard pin-out.
I made these because many folks wanted to use Gotek Virtual Floppy Drives with their Tandy's but due to the non-standard power-over-cable-design were unable to.
I highly recommend using the free FlashFloppy Firmware on Gotek Drives as the stock FW is quite poor. On my TL/2, I found that the FlashFloppy FF.CFG file needs the "pin34" option set to "chg" to enable Disk Change detection.
My Store can be found here: https://www.tindie.com/stores/CyberneticSys/