dalathegreat/Nissan-LEAF-Battery-Upgrade

Issues

• Leaf 2018 40kWh -> 62kWh can problem

  #39 opened 5 months ago by 00gtw00
  6

• ZE0 2011 24kwh-24kwh upgrade- not charging -FIXED

  #43 opened 2 months ago by Kontich
  4

• Letting thru 0x1C2 message to VCM

  #41 opened 3 months ago by dalathegreat
  0

• Flashing 2 Port STM32 ARM Based CAN Bridge Using Linux

  #38 opened 6 months ago by riceke
  6

• Not possible to AC charge on ZE0 after update to 4.24

  #37 opened 6 months ago by malyjaponec
  2

• Will not DC fastcharge

  #29 opened 6 months ago by multitron1
  2

• ZE0 with heavily degraded pack will show 12/12bars too soon

  #35 opened 7 months ago by dalathegreat
  4

• 2011-2012: Some permanent fault codes on after battery upgrade

  #8 opened a year ago by dalathegreat
  11

• 2011-2012 ZE0: Fastcharging ends with Check EV light

  #25 opened 7 months ago by dalathegreat
  3

• 2011-2017 Not possible to quickcharge for over 60minutes

  #21 opened a year ago by dalathegreat
  3

• SOH decreased after update from 4.20 to 4.21

  #31 opened 7 months ago by malyjaponec
  7

• ZE0 - 80% timer does not work

  #1 opened 7 months ago by dalathegreat
  11

• 2011-2012 ZE0: Battery SOH bars stuck at 12

  #9 opened a year ago by dalathegreat
  3

• 2011-2012 ZE0: Bars are rescaled incorrectly when charge ends

  #10 opened 7 months ago by dalathegreat
  5

• 2 Port Can bride is not working even after successful message on programming

  #15 opened 7 months ago by maheshsachintha
  14

• Errors

  #18 opened a year ago by Smurfy4
  4

• Add up all the nibbles in CSUM

  #3 opened 7 months ago by InfantEudora
  3

• Leaf BZO 30kw

  #27 opened 7 months ago by Angelbp1987
  1

• Fast charging is working!!!

  #24 opened 9 months ago by patrickHall4
  2

• Control DC charging current (feature)

  #26 opened 9 months ago by malyjaponec
  0

• Feature list ?

  #23 opened a year ago by fjgaston
  1

• Batterysaver

  #22 opened a year ago by nimz77
  1

• battery management

  #20 opened a year ago by hugor25
  1

• 2 port CAN bridge stopped working, what to check?

  #19 opened a year ago by marcexec
  1

• I think in the 2 port bridge instructions car can and battery can are reversed

  #17 opened a year ago by CrAzYDr1veR
  2

• 2 port can sourse code, the inc and src folders are not under /core.

  #2 opened a year ago by Spaceballs3000
  1

• battery percentage shows N/A

  #7 opened a year ago by westsince2001
  4

• No advanced features after successfull 2 Port bridge installation

  #6 opened a year ago by Jorindel53
  5

• Battery paired but lots of errors

  #4 opened a year ago by gio-giorgio
  11

• No "Project" files

  #5 opened a year ago by vitecd
  1