PoShWarp

PoShWarp is a PowerShell port of the wd plugin for zsh. It aims to offer the same convenience that wd offers in zsh alongside some idiomatic PowerShell commands.

Installation

If you have PsGet installed, you can simply execute:

Install-Module PoShWarp

Otherwise, for a manual installation:

Create a PoShWarp directory in your modules folder. You can determine where this is by looking at the PSModulePath environment variable.
Download PoShWarp.psm1 and place it in the newly created PoShWarp directory.
PoShWarp should automatically load next time you start PowerShell. If this does not happen, add Import-Module PoShWarp to your $profile.

Motivation

Our systems contain projects strewn all over our systems. We aim to keep things organised but something will always disrupt our careful organisation, and it becomes far to easy to forget where all these things end up living. With PoShWarp, this problem becomes far more manageable because these commonly-used locations can be given names.

Let's say we have a folder that contains a set of projects:

E:\Projects> Get-ChildItem


    Directory: Microsoft.PowerShell.Core\FileSystem::E:\Projects


Mode           LastWriteTime       Length Name
----           -------------       ------ ----
d----    24/11/2014    17:11        <DIR> CunningEmbeddedProject
d----    24/11/2014    17:11        <DIR> SuperAwesomeProject
d----    24/11/2014    17:11        <DIR> TrendyWebProject

We can can create warp-names for two of these projects like so:

E:\Projects> cd .\SuperAwesomeProject\
E:\Projects\SuperAwesomeProject
E:\Projects\SuperAwesomeProject> New-WarpLocation awesome

Name                Path
----                ----
awesome             E:\Projects\SuperAwesomeProject


E:\Projects\SuperAwesomeProject> New-WarpLocation trendy ..\TrendyWebProject

Name                Path
----                ----
trendy              E:\Projects\TrendyWebProject

These two bindings now appear in a system-wide warp-map that exists in the same directory as your $profile by default. You can relocate the warp-map by setting the POSHWARP_MAPFILE environment variable to point where you would prefer it to be. Now our sample warp-map looks like:

E:\> Get-WarpLocation

Name                Path
----                ----
awesome             E:\Projects\SuperAwesomeProject
trendy              E:\Projects\TrendyWebProject

Now we can enter into either project directory without needing to remember the path:

C:\> Select-WarpLocation awesome
E:\Projects\SuperAwesomeProject> Select-WarpLocation trendy
E:\Projects\TrendyWebProject>

Granted, this example is rather simple but visiting directories frequently can get annoying quite swiftly. Especially if those paths are particularly deep or if they contain confusing or similar sub-directories. With PoShWarp, cd-ing to that arcane directory can now be replaced with Select-WarpLocation myplace or the far simpler wd myplace.

Commands

Select-WarpLocation

Select-WarpLocation [-WarpName] <String> [-PassThru] [<CommonParameters>]

Searches the warp-map for the specified entry and sets the location accordingly.

Description

Select-WarpLocation will search the active warp-map file for the entry with the given name and attempt to Set-Location to the corresponding path. An error will be raised if no entry with the given name is found, of if the named entry exists but points to a non-existent directory.

Parameters

Parameter	Type	Description
WarpName	String	Entry name to search for in the warp-map.
PassThru	Switch	Return the new directory object after changing into it.

New-WarpLocation

New-WarpLocation [-WarpName] <String> [[-Path] <String>] [<CommonParameters>]

Creates a new entry in the current warp-map.

Description

A new entry will be added to the warp-map currently active using either the current or specific directory path. If the does not exist, no entry will be created. A warp-map XML file with be created if one does not already exist.

Parameters

Parameter	Type	Description
WarpName	String	Name for the new warp-map entry.
Path	String	Path to assign to WarpName. Defaults to the current directory.

Remove-WarpLocation

Remove-WarpLocation [[-WarpName] <String>] [-WhatIf] [-Confirm] [<CommonParameters>]

Removes the specified entry from the active warp-map.

Description

Searches the active warp-map for the named entry and then removes it. The current directory will be used as a search term if no name is given. All entries that meet the criterion will be removed. An empty warp-map file will not be created if one does not already exist.

Parameters

Parameter	Type	Description
WarpName	String	Warp-map entry name to search for.

Get-WarpLocation

Get-WarpLocation [[-WarpName] <String>] [[-Path] <String>] [<CommonParameters>]

Gets the entries from the warp-map, optionally filtering by name or path.

Description

Get-WarpLocation will return all the entries from the warp-map that meet the given search criteria. Zero or more entries will be returned. Both a warp-name and a path may be specified, and both must match to return any results. No error will be raised if the query results in no matches.

Parameters

Parameter	Type	Description
WarpName	String	Name to search for in the warp-map.
Path	String	Path to search for in the warp-map.

Repair-WarpMap

Repair-WarpMap [-WhatIf] [-Confirm] [<CommonParameters>]

Removes all invalid directory references from the warp-map.

Description

Over time, a living warp-map can retain entries pointing to directories that no longer exist. Repair-WarpMap checks every entry in the warp-map and removes any that reference a directory that has been deleted. Multiple entries pointing to the same directory will remain unchanged provided that they point to a directory that still exists.

wd

wd [-WarpName <String>] [-Path <String>] [-PassThru] [[-argv] <Object>] [-WhatIf] [-Confirm] [<CommonParameters>]

Provides all warp-map functionality under a single utility command.

Description

wd is a clone of the command offered in the eponymous zsh package. It provides an interface to all of the other commands in PoShWarp:

wd add, wd new      -> New-WarpLocation
wd rm, wd del       -> Remove-WarpLocation
wd ls, wd list      -> Get-WarpLocation
wd clean, wd repair -> Repair-WarpMap
wd help             -> Get-Help wd

wd also supports wd show <WarpName> which lists all entries that share the given name. This has been provided as a convenience as it simply maps onto Get-WarpLocation, and also for compatibility with the original wd command.

wd treats the first argument as a warp-map entry name if it does not match one of the sub-commands. In this instance wd <WarpName> maps onto Select-WarpLocation -WarpName <WarpName>.

As wd exists for compatibility with the zsh package, it primarily relies on positional arguments as follows: wd <sub-command> <WarpName> <Path>. However, named parameters are also supported to make good use of PowerShell.

Parameters

Parameter	Type	Description
WarpName	String	Name for the warp-map entry.
Path	String	Path for the warp-map entry.
PassThru	Switch	Only used when selecting a warp location: flag propagates directory to `Select-WarpLocation`.

The Warp-map File

All warp-locations created by New-WarpLocation are saved in an XML file called the warp-map. By default, this file is named WarpMap.xml and will be created in the same directory as your $profile, but it can be placed elsewhere using the POSHWARP_MAPFILE environment variable. The commands in the example given above would lead to the following warp-map:

<?xml version="1.0"?>
<WarpMap>
  <Location Name="awesome" Path="E:\Projects\SuperAwesomeProject" />
  <Location Name="trendy" Path="E:\Projects\TrendyWebProject" />
</WarpMap>

The format is largely self-explanatory and has been kept deliberately simple. Warp-maps maybe be edited by hand and may include custom XML if you wish to use the file for multiple purposes. There is no guarantee that the additional elements will be left undamaged, but PoShWarp commands have been designed to modify only the elements that are necessary. Of course, there is a risk that a future version of PoShWarp may include additional XML that may conflict with any custom elements that have been added.

Testing

Every exported PoShWarp command includes a corresponding set of tests that can be executed using Pester. Running the Invoke-Pester command from the source directory will load PoShWarp.Tests.ps1 and create an environment for the tests to operate in. This environment includes a warp-map and a suitable directory structure which will be removed as part of the tear-down.

Licence

The MIT License (MIT)

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

daltonscole/PoShWarp

PoShWarp

Installation

Motivation

Commands

Select-WarpLocation

Description

Parameters

New-WarpLocation

Description

Parameters

Remove-WarpLocation

Description

Parameters

Get-WarpLocation

Description

Parameters

Repair-WarpMap

Description

wd

Description

Parameters

The Warp-map File

Testing

Licence