danielkucera/esp-arduino-ebus

Issues

• Vailant Heat Pump Controller displays "Communication Fault" when adapter is connected

  #50 opened 2 years ago by simonaldrich
  14

• esp ebus v6.3 firmware 7.1 wifi password length restrictions?

  #87 opened a month ago by baahver
  10

• adapter not working, D1 is on

  #86 opened a month ago by EricVdB
  1

• static ip

  #83 opened a month ago by ilgio
  2

• factory reset

  #84 opened a month ago by ilgio
  8

• Power problem - Wolf

  #63 opened a year ago by TFIPS
  6

• Device not starting

  #82 opened a month ago by realrewa
  2

• Error message on thermostat after connecting adapter

  #80 opened 2 months ago by Proim
  8

• esp-ebus V6.1 with no signal

  #81 opened 2 months ago by docava65
  6

• Adapter refuses connections after a while

  #76 opened 4 months ago by step21
  1

• VRSOL 2.0 + V6.1 adapter + HAOS + EBUSD

  #75 opened 4 months ago by telemake69
  5

• No ebus data from WRSOL 1.1

  #74 opened 9 months ago by fatz
  8

• Vaillant aroSTOR VWL BM 270/5 heat pump no usefull data can be collected from the eBUS

  #72 opened 9 months ago by stadlerw
  6

• EBUS to WiFi Adapter Module V6.1 - errors in logs

  #73 opened 9 months ago by raftheunis87
  3

• Enhancement of status page

  #70 opened 9 months ago by HuffYk
  2

• Compiling firmware

  #69 opened 9 months ago by HuffYk
  8

• gas boiler hermann

  #67 opened 9 months ago by pabloMG85
  9

• checking firmware to update from web

  #68 opened 9 months ago by xjols
  4

• Updating to latest software v7.0 doesn't work in web

  #66 opened 10 months ago by HuffYk
  2

• Frequent Arbitration lost errors writing on the Bus

  #22 opened 10 months ago by wrongisthenewright
  37

• Open wifi network start

  #61 opened 10 months ago by danielkucera
  1

• No data showing in HomeAssistent, errors in log

  #62 opened a year ago by Peter-79
  5

• open http://esp-ebus.local/param to adjust PWM value

  #65 opened 10 months ago by tomm10000
  16

• This page isn’t working

  #51 opened 10 months ago by adallari1969
  8

• How to reset 5.1 HW

  #41 opened 10 months ago by tomklapka
  5

• New 6.1 device bought from elecrow has protected wifi

  #56 opened a year ago by Spancii
  65

• Home assistant loses connection with EBUS adapter

  #60 opened a year ago by etmnidj1
  9

• Vaillant BAI cant control

  #59 opened a year ago by bayc4d
  2

• Invalid device

  #54 opened a year ago by jankorous
  3

• Firmware v6.1 HW v2.1

  #55 opened a year ago by HiQual
  5

• Signal lost

  #57 opened a year ago by JaccovdS
  5

• Communication fault VWZ AI

  #52 opened a year ago by xbouthoorn
  2

• No Wifi AP on first boot

  #53 opened a year ago by vermmatt
  1

• Home Assistant integration

  #11 opened 2 years ago by Elijen
  6

• WDT is disabled for ESP8266

  #48 opened 2 years ago by bakadave
  4

• Unable to connect with espota.py

  #45 opened 2 years ago by tomklapka
  1

• Can you help?

  #36 opened 2 years ago by HiQual
  1

• Using this eBus with PS5511SZ

  #25 opened 2 years ago by El-Omari
  5

• esp32 v5 firmware upload

  #35 opened 2 years ago by PiotrHab
  2

• Is port 3335 both read and write?

  #33 opened 2 years ago by HiQual
  5

• telnet connection

  #21 opened 2 years ago by samezrp
  1

• UART programming fails, RXD pulled low by opamp

  #27 opened 2 years ago by bakadave
  2

• read-only interface issue

  #26 opened 2 years ago by SzosszeNET
  6

• [bus error] device status: unexpected available enhanced byte 2

  #5 opened 2 years ago by Wassman2020
  47

• esp8266-ebus v3.0

  #24 opened 2 years ago by Sethach
  3

• [main error] scan config 05: ERR: read timeout

  #12 opened 2 years ago by HiQual
  1

• [main error] scan config 08: ERR: arbitration lost

  #10 opened 2 years ago by linoul
  18

• Questions about the code base

  #14 opened 2 years ago by ysard
  7

• Adapter not working when connected to slave device

  #13 opened 2 years ago by mwullink
  6

• V2 board - recent updates

  #9 opened 2 years ago by HiQual
  2