danielrivard/homeassistant-innova

Home Assistant Integration for Innova 2.0 Heat Pump and AirLeaf

homeassistant-innova

Custom Component for controlling some Innova Heat and A/C products through Home Assistant (2.0 and AirLeaf currently supported)

Installation

HACS

The Innova integration is available through HACS.

Download and configure HACS.

https://peyanski.com/how-to-install-home-assistant-community-store-hacs/

Once installed and configured, you can search for the Innova in HACS' integration section.

From there, jump to the configuration of this readme to continue setup your Innova device.

Manual Installation

You can also manually install as a custom component on your Home Assistant installation.

Follow these steps:

• In Home Assistant's config directory, you need to create a custom_components and an innova folder under it.
  • config/custom_components/innova
• In this directory, you need to copy these files from this repository:
  • translations
  • __init__.py
  • climate.py
  • config_flow.py
  • const.py
  • coordinator.py
  • device_info.py
  • manifest.json
  • sensor.py
  • string.json

Configuration

From UI

This integration can be configured from the HA UI. You may need a hard refresh in your browser if you just installed the component.

Go to Settings -> Devices & Services

Then Add Integrations

Search for Innova

Configure the IP Address and optionally the area

That's it, you now have an Innova device and entity configured

Repeat the process for multiple units

Restart Home Assistant

At this point you should have a new device with a climate entity that can control the Innova unit and a sensor entity for the current ambient temperature.