Adding OpenWRT support for Mojo Networks C-75 (Airtight C-75) Airtight C-75 (Mojo Networks C-75) Dual radio, Dual concurrent 3x3 MIMO 802.11ac access point based on Qualcomm Atheros QCA9550.
Specification:
- SoC : Qualcomm Atheros QCA9550-AT4A
- RAM : DDR2 128 MiB
- Flash : SPI-NOR 2*16 MiB
- WLAN : 2.4/5 GHz 3T3R
- 2.4 GHz: QCA9550 (SoC)
- 5 GHz : QCA9890-BR4A
- Ethernet : 2x 10/100/1000 Mbps
- Switch : AR8034-AL3C
- LEDs/keys : 8x/1x
- UART: Standart RJ45 wired (with level shifter) to TTL J3 unpopulated on PCB
- RJ45: standart Cisco cable
- J3: 1=3.3v 2=TX 3=RX 4=GND
- Settings: 115200 bps, no flow control
- JTag: Unpopulated J1
Known limitations in this release:
- This board has QCA9550-AT4A CPU but identified as QCA9558.
- LEDs "2.4Ghz WiFi" and "Power Green" do not work, power is always orange and 2.4G is always off.
- Reset Button does nothing.