media-server

media-server is a live streaming server based on brpc used in Live Streaming Service of Baidu Cloud.

Main features

Support origin server which streams can be pushed to and played from
Support edge server to proxy push/pull requests
Support rtmp/flv/hls play
Support rtmp push
Streams are uniquely determined by vhost/app/stream_name
Configurable push/pull retry policy
Support simplified rtmp protocol that eliminates rtmp handshake process
Support visual interface(via http) to check the status of the current server/streams
Support low latency hls(about one second slower than rtmp/flv)
Support video/audio only live streaming
Configurable frame queue buffer length(typically several seconds)
Support keep pulling streams for several seconds when no players are watching
Support dumping stream status into log for monitoring purpose
Support different re-publish policy
Support https
All features brought by brpc

Getting Started

Supported operating system: Linux, MacOSX.

Install brpc which is the main dependency of media-server
Compile media-server with cmake:

mkdir build && cd build && cmake .. && make -sj4

Run media-server as origin server with minimum configuration(the default port is 8079):

./output/bin/media_server

Then you can push/play stream from it.

Main options

Please run

./output/bin/media_server --help

to get all configurations in detail.

-proxy_to When not specified or empty, media-server runs in origin mode, which aggregates push(such as OBS, ffmpeg) and accepts play(such as cyberplayer, ffplay) requests.
-proxy_lb When -proxy_to is a naming service(such as http://...), you need to specify load balancing algorithm. The options are rr, random, la, c_murmurhash and c_md5. Read client load balancing for details.
-port Specifies the service port of media-server. Brpc is characterized by supporting all protocols on the same port, so this port can also be used for accessing the built-in service via http. Only ports in the range of 8000-9000 can be accessed by browsers, which means if the service port is external, be sure to configure -internal_port to prevent built-in service from leaking detailed service information.
-internal_port This port can be configured as a port that can only be accessed on the internal network. In this case, the -port port no longer provides built-in services, but will only be accessible through this port.
-retry_interval_ms When media-server runs in edge mode, push and pull requests to upstreams will be retried when error happens until clients no longer need. This option specifies the minimum interval for continuous retry, which is 1 second by default.
-share_play_connection When set to true, multiple streams connected to the same server will reuse the same rtmp connection in play.
-share_publish_connection When set to true, multiple streams connected to the same server will reuse the same rtmp connection in publish.
-timeout_ms Timeout period for creating a stream when media-server runs in edge mode. The default value is 1000ms.
-server_idle_timeout Connections without data transmission for so many seconds will be closed. The default value is -1(turned off).
-cdn_merge_to When this option is set, media-server starts two ports, one for external service request and the other for the aggregating request. Usually the aggregating server will be found using consistent hashing, which is used widely in cache service. This option is often used in cdn nodes.
-cdn_merge_lb The load balancing algorithm. Read the explanation written below -proxy_lb.
-flagfile media-server uses gflags options, which is specified by default in the command line and can also in file format during online deployment by using -flagfile.

Examples

Run media-server as origin server and edge server.

Other docs