daredevils2512/PowerUp

Issues

• Create Hold command for intake that will "Hold" the cube for travel. Add Photo cell limit switch

  #49 opened 7 years ago
  2

• CONTROL WHEN INTAKE DROPS

  #48 opened 7 years ago
  2

• add interrubtable command that will turn both elevator motors in opposite directiopns at low amount to keep tension on the cables

  #47 opened 7 years ago
  0

• Add collision detection for switch auto

  #46 opened 6 years ago
  0

• Dashboard broadcast

  #40 opened 6 years ago
  1

• Test POE cable on Atlas

  #39 opened 7 years ago
  1

• clean up issues

  #38 opened 7 years ago
  1

• Enable all warnings and set warnings as errors.. c++ issues to address

  #37 opened 7 years ago
  0

• Ensure we can use the elevator limit prior to the spools fully unwinding

  #36 opened 7 years ago
  1

• IS IT ELECTRICAL??? Do Power analysis from drivers station run logs

  #35 opened 7 years ago
  2

• Write up Root Cause Analysis of failures

  #34 opened 7 years ago
  4

• NO LONG RUNNING CODE IN ROBOT!!!! . Also why are we extending iterative, we should be extending Timed (i know it's the same but just reading the documentation)

  #33 opened 7 years ago
  0

• Fix build Configurations

  #32 opened 7 years ago
  1

• Verify CPU Usage on roborios.. FRCNetDaemon && Our Program

  #31 opened 7 years ago
  0

• Fix Autonmous Distances

  #30 opened 7 years ago
  0

• Fix Autonmous to not get stuck

  #29 opened 7 years ago
  1

• Restructure Autonmous Code to not have such nasty IF blocks

  #28 opened 7 years ago
  0

• comms issues (latency + packet loss)

  #27 opened 7 years ago
  3

• Northern Lights problems

  #26 opened 7 years ago
  0

• implement pathfinder for autonomous

  #14 opened 6 years ago
  1

• Latency on video

  #13 opened 7 years ago
  0

• create autonomous scripts

  #12 opened 7 years ago
  2

• create code for handling game specific message

  #11 opened 7 years ago
  0

• create side code for other ultrasonic sensors..

  #10 opened 7 years ago
  0

• Convert these values to variables.

  #2 opened 7 years ago
  1

• Seg fault when enabling Test mode

  #1 opened 7 years ago
  7