MoodleBox Moodle plugin

A Moodle administration plugin providing a GUI to some settings and management of a MoodleBox, a Moodle server installed on a Raspberry Pi.

This plugin enables a Moodle administrator to monitor some hardware settings, to set the date of the MoodleBox, to allow restart and shutdown of the MoodleBox and changing Raspberry Pi passwords using a GUI. After the installation in Moodle, some steps are required to complete on the Raspberry Pi (see below).

Administrators and users with manager role can moreover restart and shutdown the MoodleBox with buttons in the footer of each Moodle page.

The plugin is compatible with Moodle 3.6 or later. A Raspberry Pi model 3A+, 3B, 3B+ or 4B is recommended.

Installation

The MoodleBox plugin must be installed in the Moodle tree of the MoodleBox, in the tool folder. Once installed, an new option MoodleBox will be available in Moodle, under Site administration > Server in the Administration block.

To complete the installation, you have to configure some incron jobs on the MoodleBox.

Install incron package and allow root to run it:

sudo apt-get install incron
echo root | sudo tee -a /etc/incron.allow

Add following lines to incrontab:

/var/www/moodle/admin/tool/moodlebox/.reboot-server IN_CLOSE_WRITE /sbin/shutdown -r now
/var/www/moodle/admin/tool/moodlebox/.shutdown-server IN_CLOSE_WRITE /sbin/shutdown -h now
/var/www/moodle/admin/tool/moodlebox/.set-server-datetime IN_CLOSE_WRITE /bin/bash /var/www/moodle/admin/tool/moodlebox/.set-server-datetime
/var/www/moodle/admin/tool/moodlebox/.newpassword IN_CLOSE_WRITE /bin/bash /var/www/moodle/admin/tool/moodlebox/bin/changepassword.sh
/var/www/moodle/admin/tool/moodlebox/.wifisettings IN_CLOSE_WRITE /bin/bash /var/www/moodle/admin/tool/moodlebox/bin/changewifisettings.sh
/var/www/moodle/admin/tool/moodlebox/.resize-partition IN_CLOSE_WRITE /bin/bash /var/www/moodle/admin/tool/moodlebox/bin/resizepartition.sh

Copy the following line at the end of file /etc/sudoers:

www-data ALL=(ALL) NOPASSWD:/sbin/parted /dev/mmcblk0 unit MB print free
www-data ALL=(ALL) NOPASSWD:/usr/bin/vcgencmd

If you use the PiJuice module, you need to install the packages related
```
sudo apt-get install pijuice-base
```
then allow www-data to access I2C:
```
sudo adduser www-data i2c
```
and reboot.

Features

Info about the MoodleBox (kernel version, Raspberry Pi OS version, free space on SD card, CPU load, CPU temperature, CPU frequency, uptime, DHCP clients).
Warning when under voltage detected.
GUI to set the MoodleBox date and time.
GUI to set the MoodleBox password.
GUI to set the MoodleBox Wi-Fi network password (or remove it), SSID and channel.
GUI to resize the partition of the SD card of the MoodleBox.
GUI to restart and shutdown the MoodleBox.

Availability

The code is available at https://github.com/moodlebox/moodle-tool_moodlebox.

Release notes

See Release notes.

Thanks

To Adrian Perez (@adpe), for implementing restart and shutdown buttons in footer.
To Vincent Widmer (@smallhacks), for implementing PiJuice support.
To Visvanath Ratnaweera (@ratnavis), who kindly donated a Raspberry Pi 3A+ and loaned a Raspberry Pi 4 8GB, enabling support of these Raspberry Pi models.

License

All the source code is licensed under GPL 3 or any later version
The documentation is licensed under Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International.

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.