ClevoControl

Control keyboard backlight and fan policy for Clevo Hackintosh This project only supports clevo laptops with full-color backlight support. However, you can easily modify it to fit in 8-color backlight keyboards. I have only tested it on my Clevo P650RS so I won't promise it will work, but it should.

DEPRECATED: As Apple removed Nvidia support in recent macOS versions, I stopped using Clevo laptop as Hackintosh and thus not going to add new features to this kext. You may refer to ClevoService, which has more features such as keyboard controls and surviving through power off using NVRAM.

How to use

Directly calling WMBB method in WMI device will lead to a kernel panic. I have no idea about why it's happening, so you should add following code into your DSDT:

Device (SMCD)
{
    Name (_HID, EisaId ("PNP0C02"))
    Name (_CID, "MON00000")
    Method (WMIB, 3, Serialized)
    {
        \_SB.WMI.WMBB(Arg0, Arg1, Arg2)
    }
}

You may already have SMCD device in your DSDT, then please ensure one of your _HID or _CID is "MON0000" or "MON00000" and add WMIB method into it.

After you edit your DSDT, install ClevoControl.kext to /L/E (injecting it using Clover cause kernel panic) and use ClevoKBFanControl (a small command-line program) to control settings.

Show usage by ClevoKBFanControl -h.

This project uses args for parsing command-line arguments. And the WMI operate codes used in this project comes from clover-xsm-wmi and reverse engineering Clevo Control Center by myself.

Some Extra information

Fan Speed

To actually show the fan speed in HWSensors.app, you must have FakeSMC_ACPISensors.kext installed (both the kext and the app are available in Rehabman's FakeSMC), and edit the DSDT. For my laptop with 3 fans, add these to SMCD device (it uses B1B2 method, add it if you don't have it in your DSDT):

Name (TACH, Package (0x06)
    {
        "CPU Fan", "FAN0",
        "GPU Fan #1", "FAN1",
        "GPU Fan #2", "FAN2"
    }) // Define fan names

Method (FAN0, 0, Serialized)
{
    If (\_SB.PCI0.LPCB.EC.ECOK)
    {
        Local0 = B1B2(\_SB.PCI0.LPCB.EC.FC01, \_SB.PCI0.LPCB.EC.FC00)
        If (Local0 <= 0)
        {
            Return (0)
        }
        Local0 = 2156220 / Local0
        Return (Local0)
    }
    Return (0)
}

Method (FAN1, 0, Serialized)
{
    If (\_SB.PCI0.LPCB.EC.ECOK)
    {
        Local0 = B1B2(\_SB.PCI0.LPCB.EC.FG01, \_SB.PCI0.LPCB.EC.FG00)
        If (Local0 <= 0)
        {
            Return (0)
        }
        Local0 = 2156220 / Local0
        Return (Local0)
    }
    Return (0)
}

Method (FAN2, 0, Serialized)
{
    If (\_SB.PCI0.LPCB.EC.ECOK)
    {
        Local0 = B1B2(\_SB.PCI0.LPCB.EC.FG11, \_SB.PCI0.LPCB.EC.FG10)
        If (Local0 <= 0)
        {
            Return (0)
        }
        Local0 = 2156220 / Local0
        Return (Local0)
    }
    Return (0)
}

The B1B2 method can be added with MaciASL:

into method label B1B2 remove_entry;
into definitionblock code_regex . insert
begin
Method (B1B2, 2, NotSerialized) { Return(Or(Arg0, ShiftLeft(Arg1, 8))) }\n
end;

If you only have 2 or 1 fan, delete FAN2 or FAN2 & FAN1, respectively.

Then find for EmbeddedControl Field in your DSDT, search for EmbeddedControl in your DSDT and you will see something like this:

OperationRegion (EC81, EmbeddedControl, Zero, 0xFF)
Field (EC81, ByteAcc, Lock, Preserve)
{
...
}

Add these in the Field method as first. As mentioned above delete extra values. e.g. delete FG10 and FG11 if you don't have two GPU fans.

Offset (0xD0),
FC00,   8,
FC01,   8,    // CPU Fan Speed
FG00,   8,
FG01,   8,    // GPU Fan0 Speed
FG10,   8,
FG11,   8,    // GPU Fan1 Speed

Note: the second GPU fan (GPU Fan1) can be located at a different offset. You can try to find the offset by looking at the EC table. Under windows you can use RWEverything. For Clevo P950HR the second GPU fan is located at Offset (0xE0), so edit the above accordingly.

Last, edit FakeSMC.kext/Contents/Info.plist, change the data in FNum from 00 to number of your fans.

datasone/ClevoControl

ClevoControl

How to use

Some Extra information

Fan Speed