Eweknits (pronounced "YU-nihts", i.e., "units") is a library for creating and working with "units" (such as feet, grams, seconds, potrzebies, etc.), and "measures" (such as 30 days, 9.8 meters per second per second, 364.4 smoots, 123 furlongs per fortnight, etc.).
It provides some "base" units (such as seconds, inches, meters, ounces avoirdupoids, and grams), and some units made from combining them (such as newtons, horsepower, and kilowatt-hours).
You will probably mostly be creating and using measures.
These are created using Eweknits.measure/2.
The arguments are a numeric quantity and a unit.
For instance:
earth_gravity = Eweknits.measure(9.8, meter_per_second_squared)Once you have a measure, you can
add it to or subtract it from another measure of the same unit,
and multiply or divide it by another measure or a number.
For instance:
# hurl something straight down at 3.1 m/s, on the moon,
# and how fast is it going after 4.5 seconds?
# (assuming we threw it from high enough!)
moon_gravity = earth_gravity / 6
initial_velocity = Eweknits.measure(3.1, meter_per_second)
falling_time = Eweknits.measure(4.5, second)
falling_velocity = initial_velocity + moon_gravity * falling_timeYou can also create your own units by
either just declaring it with Eweknits.unit/1,
or multiplying or dividing an existing unit by another unit.
For instance:
newton = kilogram * meter / second / second
joule = newton * meter
watt = joule / secondEweknits will automagically take care of ensuring that the resulting measure will have the correct unit. For instance, if you divide a "foot" measure by a "second" measure, you will get a measure whose unit is "feet per second".
At this time it does not handle scaled units (e.g., automatic conversion between feet and inches, let alone between feet and meters), vector units (such as true velocity as opposed to speed), nor unit conversions that require an offset (such as between degrees C, F, and K). These features will most likely be added in that order.
It also does not yet search for extant units fitting a description. So, if you do a calculation that results in, say, joules, and print out the results, it will print them out in terms of the base units and their exponents. Eventually it may search a registry for some way to at least simplify the output.
If available in Hex, the package can be installed
by adding eweknits to your list of dependencies in mix.exs:
def deps do
[
{:eweknits, "~> 0.1.0"}
]
endDocumentation can be generated with ExDoc and published on HexDocs. Once published, the docs can be found at https://hexdocs.pm/eweknits.