####################################
### ###
### README for acp_commander ###
### ###
####################################
ACP_Commander can be used to remotely control your arm9-based LS Pro/LS Live/Tera Pro v2/Tera Live.
It connects to a stock process so it even works with the stock firmware + in EM Mode.
You only need acp_commander.jar
there is no GUI at the moment, just commandline.
=============================================
======= The most important uses =======
=============================================
1) spawning telnet + clearing the root password (Option "-o" )
2) clearing /boot when you encounter an ACP_State_Failure while trying to reflash
via the firmware updater because /boot is full. the old hddrootfs-files will be
deleted there. (Option "-cb" )
3) installing wget, joe, su via addons.tar (Option "-addons")
3a) if addons.tar is in the same folder it will install it
3b) if not then it will download the addons.tar from the downloadsection
=============================================
======= Prerequisites ========
=============================================
1) make sure you have a java-runtime installed
2) have your buffalo-arm9-NASbox fully booted. regardless if EM mode or normal mode.
3) Change to the Commandline
Win32: Start/Execute/"cmd" or Start/Ausf?hren/"cmd"
4) Change to the folder where you downloaded the acp_commander-jar-file.
you will get this error message if you are in the wrong folder:
"Unable to access jarfile acp_commander.jar"
=============================================
======= Examples =======
=============================================
buffalo-arm9-NASbox-IP: 192.168.1.11 (replace it with the IP of your box)
-) most common one (starting telnet + clear root password + install addons-package)
java -jar acp_commander.jar -t 192.168.1.11 -o -addons
-) we want to spawn telnet + clear root password:
java -jar acp_commander.jar -t 192.168.1.11 -o
-) spawn telnet/clear root PW + clear /boot (ACP_State_Failure)
java -jar acp_commander.jar -t 192.168.1.11 -o -cb
-) install addons.jar (either have it locally in the same folder or it will be downloaded)
java -jar acp_commander.jar -t 192.168.1.11 -addons
=============================================
======= Normal output without options =======
=============================================
#java -jar acp_commander.jar
ACP_commander out of the linkstationwiki.net project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.
WARNING: This is experimental software that might brick your linkstation!
Version 0.4.0 (beta)
Usage: acp_commander [options] -t target
options are:
-t target .. IP or network name of the Linkstation.
-m MAC ... define targets mac address set in the ACP package.
-na ... no authorisation, skip the ACP_AUTH packet.
-ba ... use bug/bufferoverflow on LS to bypass usuall password
authentication. Standard until acp_commander 0.4.
-pw passwd . your LS admin password.
-i ID ... define a connection identifier, standard: random value.
-p port ... define alternative target port, default = 22936
-b localIP.. bind to local address.
-f ... find linkstation(s).
-o ... open the linkstation by sending 'telnetd' and 'passwd -d root'.
-c cmd ... sends the given shell command cmd to the linkstation.
-s ... interactive shell.
-cb ... clearoot, output of df follows for control of success.
-ip newIP... change IP to newIP (basic support).
-save ... save configuration.
-load ... load configuration.
-blink ... blink LED's and play some tones.
-gui nr ... set WEB GUI language 0=Jap, 1=Eng, 2=Ger
-addons ... install addons.tar from local or linkstationwiki.
-diag ... run some diagnostics on LS settings (lang, backup).
-emmode ... Linkstation reboots next into EM-mode.
-normmode .. Linkstation reboots next into normal mode.
-reboot ... reboot Linkstation.
-shutdown .. shut Linkstation down.
-d1 | -d2 .. set debug level, generate additional output
-q ... quiet, surpress header, does not work with -h or -v
-h | -v ... extended help
-u ... usage (this output)
*) this is not the MAC address the packet is sent to, but the address within
the ACP packet. The linkstation will only react to ACP packets if they
carry the correct (its) MAC-address or FF:FF:FF:FF:FF:FF
This program is the result of the work done at nas-central.org (linkstationwiki.net), which is
not related with Buffalo(R) in any way.
Experimental software, use with care, it might brick your Linkstation!
code by Georg, readme here by mindbender