/udm-pro-network

Unifi UDM-Pro prosumer network configuration

Creative Commons Zero v1.0 UniversalCC0-1.0

Prosumer network configuration using Unifi/Ubiquiti gear

Ubiquiti is a creative and proliferate producer of really cool networking gear at reasonably attractive prices. But what they are ahead in hardware and software, they lack on documentation. The basics are documented in their help pages, but many of the more involved networking configurations have gaps.

This repo was initially intended to capture and document my own home network's configuration. Hope is, this will also help others in their quest for a more solid networking experience.

Goals

  • run a reliable, secure and well performing home network with little complaints from my customer base (aka spouse & family)
  • design with Principle of Least Privilege (PoLP). One definition by NIST, see page 91
  • keep my customer base reasonably sheltered from online privacy mining and spying.
  • allow me to tinker and learn, hence this network setup is indeed over-engineered. A simple modern ISP's router & gateway could get the basic job done (but would be less fun to interact with).

Design choices

Disclaimer: I have no relationship with, no sponsoring from nor financial interests in Ubiquiti, I'm just a mostly happy customer of their products.

About ~10 years ago, I discovered Ubiquiti's prosumer networking hardware that is indeed disruptive, for the price they are able to offer their hardware. My journey with UI started with just an AP or 2, combined with an EdgeRouterLite 3, adding a couple PoE capable switches to it over time. This summer I finally took the plunge to replace my ERL3 (which started to exhibit some thermal stability issues) with the UDM Pro Unifi Dream Machine Pro

Basic topology

This is the current physical wired topology, with the UDM-Pro as the gateway, and one PoE-enabled UI switch on each floor. House ethernet wiring is good for up to 1 Gbit/s, with all runs made in CAT5e; same for patch cables.

backhaul topo

Network segmentation

Following the Least Privilege principle, the LAN is separated into multiple logical segments, using VLANs:

VLAN CIDR Medium SSID Purpose
1 10.0.90.0/24 Wired 1GbE n/a backhaul, management
10 10.0.10.0/24 Wired/Wireless jenni.ap trusted home net
20 10.0.20.0/24 Wireless jenni.guest guests, internet only
30 10.0.30.0/24 Wireless jenni.iot IoT devices, internet only
40 10.0.40.0/24 Wireless jenni.media media devices, internet only
50 10.0.50.0/24 Wired n/a PoE camera devices, no internet

For my network, I chose ranges from the 10/8 private address space, feel free to pick different ranges from RFC1918, e.g. from the 172.16/12 or 192.168/16 ranges. I find it useful to reflect the sub range, e.g. .10.*, to also be the VLAN id, but there is no technical need to do so.

Note the 5 switches shown below are purely logical; the physical HW has the UDM and the 2 switches above. By default, the UDM Pro allows full inter-VLAN access, but this site's configuration will by default block any inter-VLAN connectivity, and only allow the trusted home (10) VLAN to initiate connections to the IoT (30) and media (40) VLANs. Access from/to the management (1) LAN and trunk is not allowed from any VLAN; sole exception is allowing access to the UDM-P itself from the home (10) (10.0.10.1).

Details see Firewall

logical network diagram created with: https://lucid.app/documents/view/2e7294c0-6628-45b6-8b2d-1b2a5b47b208

Configuration