Daughter board silk screen for half-swept inverted

[bowlerhatman]

Hi there, it appears the silk screening for the daughter board on the half swept is inverted, i.e. the indication for which rows of holes should be used for each side is backwards. This leads to VCC being shorted to reset if you follow the visual indication. Can I suggest clarifying the silk screening, or alternatively removing it and providing written and visual instruction? As a side note, the row of holes closest to the board edge is very close to the edge. Suggest moving the edge.cut out to the other graphical edge line.

Happy to do this, but am not up to speed with git. Fine with kicad though.