Issues
- 9
- 1
[FR] Stock drivers reversed hex
#140 opened by Stefan300381 - 0
[FR] z-jump not working
#139 opened by tecnoesco - 3
Extruder motor stops working[BUG]
#137 opened by PMarco03 - 0
[FR] 2.1.x?
#136 opened by SamuelRilling - 0
New Hex for TMC2208?[BUG]
#135 opened by McMuffin88 - 1
TMC2208 X-Axis
#134 opened by yoderse - 3
- 1
- 1
[BUG] fastio.h:84:32: error: 'DIO31_RPORT' was not declared in this scope
#123 opened by Brian-Zombait - 1
[BUG] Filament Sensor not working
#132 opened by mr-who2012 - 1
- 1
Vref voltages on TMC2208 FAQ (E1 and E0 ?)
#130 opened by alessandrovarela - 0
[BUG] No way to stop experimental M888
#129 opened by MikeOxlong83 - 0
Question: Mega Pro Support?
#128 opened by xXDjMikeXx - 2
STARTUP_CHIME Anycubic Meg
#126 opened by dietlow - 1
- 0
Arduino Ide
#121 opened by kidd0s771 - 1
- 2
- 1
hotend temperature is incorrect
#118 opened by Igami - 5
- 1
- 1
- 5
BUG Firmware v1.4.6 stable (Marlin 1.1.9) Mesh Bed Leveling I3 Mega Z Problem 1.4.4 works fine?
#105 opened by raindancer2204 - 3
- 1
Question: Will the precompilled hex file for TMC2208 drivers work using TMC2209 v2.0 drivers?
#114 opened by floatev - 0
[BUG] Layer Inconsistency After Print Resume
#107 opened by OwenD30 - 1
- 7
[BUG]SD Card Menu will not show
#106 opened by 3dRikal - 2
- 5
- 1
- 2
New Mega X screen compatibility
#93 opened by calufax - 1
Filament Sensor of Mega S is ignored
#103 opened by NilsRo - 3
- 1
- 1
[FR] Auto bed mesh leveling through unorthodox means (setting a high nozzle temperature and detecting temperature fluctuations on bed)
#98 opened by Natrox - 1
Documentation issue
#92 opened by CageFox - 1
Filament runout sensor not pausing USB print
#95 opened by CTHobbit - 3
- 1
[FR] Extruder Steps with 0.2mm nozzle?
#91 opened by EmmanueleVilla - 1
- 1
[BUG] Unable to flash i3 Omega - avrdude: stk500_recv(): programmer is not responding
#88 opened by proffalken - 1
Mega-S - Extruder is reverse
#87 opened by murmelbahn - 0
- 11
Bed heat shutoff
#84 opened by SeventhDread - 3
USB printing fails from Cura on Mega-S
#83 opened by kfsone - 3
BL going in wrong z direction
#82 opened by veevee2 - 3
[FR] please add tmc2209 support
#81 opened by derchan