This is a testing tool for keyboard stabilizers.
You can add your favorite switches via hotswap sockets (preferably silent ones - so you can check on stab rattle),
also it got a plate, so you can check how your caps/stabs gonna sound like when they are installed.
You gain access to the stabs from the bottom (its open) sou you can easily flip around the tool and screw in your stabs.
You gonna need for building this one:
- 1x PCB
- 1x Bottom
- 1x Plate
- 8x Kailh hotswap sockets
- 16x M2x5mm screws
- 4x M2x10mm standoffs
- 4x M2x15mm standoffs
You can test the following stab sizes:
- 7U, 6.25U, 6U
- 3U
- 2U
Cap sizes that are useable
- 7U, 6.25U, 6U
- 3U, 2.75U, 2.5U
- 2.25U, 2U
V1.1
- adjusted holes for the standoffs to push through
- added 3U support for the plate
- improve or rework the plate for better accessability of the stabs
ebastler for the support, idea and suggestions while creating this