(Travis CI status)

CESE, FI-UBA project template for CIAA-NXP / EDU-CIAA-NXP

CESE, FI-UBA: http://laboratorios.fi.uba.ar/lse/cursos.html

IMPORTANT

This environment is under construction!!

Always use the released versions because in these all examples are tested and the API documentation is consistent. The master branch may contain inconsistencies because this environment is currently under development. See the Travis CI tag above to know the status of this repository.

Available libraries:

CMSIS 5.4.0 (Core and DSP).
LPCOpen v3.02.
sAPI v0.5.2.
FreeRTOS Kernel V10.0.1.
LPCUSBlib.
Elm-Chan FatFS. Support for SD Cards (SSP) & Pendrives (USB MSD).

Supported boards

CIAA-NXP (LPC4337).
EDU-CIAA-NXP (LPC4337).

Supported toolchains

gcc-arm-none-eabi

Usage

Make sure you have an arm-none-eabi-* toolchain configured in your PATH. If you don't have it, download GCC ARM Embedded.

Define PROJECT_NAME and PROJECT_PATH variables in project.mk according to the project you want to compile (PROJECT_PATH is relative to this folder, leave void if the project is in this folder).
Compile with make.
Clean with make clean.

Make sure you have an openocd configured in your PATH.

Download to target via OpenOCD with make download.

Create a new project

Each project consist in a folder (with a non-spaces name) that includes inside 2 folders, one named src (here go, .c, .cpp or .s source code files), and another one named inc (here go, .h or .hpp source header files) and one file named config.mk, where you may configure which libraries you include and compiler options.

Add a new library

The libs folder allow you to include 2 types of libraries:

Simplie library. Consist in a folder (with a non-spaces name) that includes inside 2 folders, one named src (here go .c, .cpp or .s source code files), and another one named inc (here go .h or .hpp header files). This kind of library compiles automaticaly by the Makefile.
Advanced library. Consist in a library whit a complex folder and files strcuture, i.e. LibUSB. This case reuire make your own makefile. You can inspire from sAPI makefile to do that.

Examples

Included examples are:

ARM Cortex M4 Asembler

asm_lpc_open: assembler with LPC Open library
asm_sapi: assembler with sAPI library

C language

sAPI library
- Bare metal:
  - adc_dac: ADC and DAC example.
  - bluetooth
    - hm10_uart_bridge: Bluettoth HM10 module AT, tx and rx example.
  - cycles_counter: clock cycles counter functions, only work in debug mode. Allows execution time trazability.
  - dht11_temp_humidity: humidity and temperature sensor.
  - gpio
    - gpio_01_switches_leds: each switch drives the upper led.
    - gpio_02_blinky: the simply led blinky with a blocking delay.
    - gpio_03_blinky_switch: led blinky with a with a non-blocking delay, to allow you to respond to a switch at the same time.
    - gpio_04_led_sequences: led sequences by using a non-blocking delay.
  - hcsr04_ultrasonic_sensor: HC-SR04 utrasonic distance sensor.
  - i2c:
    - IMUs
      - mpu9250: MPU9250 IMU 9DOF (Gyroscope, Accelerometer and Magnetometer) + Temperature.
    - magnetometers. In Chinese GY-273 module you can have one of this magnetometers, that have the same pinout but different register map. To difference them see the chip, ignore the board serigraphy.
      - hmc5883l: HMC5883L magnetometer.
      - qmc5883l: QMC5883L magnetometer.
  - keypad_7segment: Drives a keypad and 7 segment display.
  - lcd: Drives a LCD display.
  - pwm
    - pwm_01: PWM applied to LEDs.
    - pwm_02_rgb_controller_uart: RGB LED example.
  - rtc: RTC peripheral to have date and time clock.
  - sapi_basic_example: a basic sAPI library example
  - servo: angular servomotor PWM control example.
  - spi_sd_card
    - spi_sd_card_01_wite_file: Wite a text file in a SD/MicroSD Card (SPI connected) by using a FAT File System (Elm-Chan FAT FS).
    - spi_sd_card_02_log_time_stamp: Wite a text file in a SD/MicroSD Card (SPI connected) by using a FAT File System (Elm-Chan FAT FS) add time-stamp in samples.
    - spi_sd_card_03_list_files: List files in a SD/MicroSD Card (SPI connected) by using a FAT File System (Elm-Chan FAT FS). Show results in UART.
  - tick_hook: periodic tick function (interrupt-based) with periodic callback.
  - uart
    - uart_01_echo: UART echo, it respond the same that you send from PC.
    - uart_02_receive_string_blocking: waits until receive a certain pattern String in a UART or timeout expire (blocking code). Don't save received string.
    - uart_03_receive_string: waits until receive a certain pattern String in a UART or timeout expire (non-blocking code). Don't save received string.
  - wifi_esp8266
    - wifi_esp8266_01_uart_bridge: use this to send AT commands directly to ESP01 module.
    - wifi_esp8266_02_thingspeak: send data to thingspeak dashboards.
  - usb
    - usb_device_01_hid_keyboard: USB Device. Board as USB Keyboard.
    - usb_device_02_cdc_virtualSerialPort: USB Device. Using USB OTG as a virtual serial port.
- Operating Systems:
  - rtos_coperative (see M.J. Pont's book at https://www.safetty.net/publications/pttes )
    - scheduler_01_seos: first cooperative scheduler
    - scheduler_02_seos_background_foreground: second cooperative scheduler
    - seos_pont_2014_01_first_app: third cooperative scheduler
  - rtos_freertos
    - dynamic_mem
      - freeRTOS_01_blinky
      - freeRTOS_03_ChanFatFS_SPI_SdCard_ADC_log: ADC logging in a SD/MicroSD Card (SPI connected) by using a FAT File System (ChanFS), freeRTOS and sAPI.
    - static_mem
      - freeRTOS_01_blinky
LPC Open library
- bare_metal
  - blinky
  - blinky_input
  - blinky_ram
  - blinky_rit
  - boot
  - i2c
  - lpc_open_basic_example
  - mpu
  - pwm
- operating_systems
  - freertos_blinky
- statecharts
  - statechart
newlib_printf_scanf
without_libs

C++ language

cpp_sapi_basic_example: a C++ basic example with sAPI library.

dc740/cese-edu-ciaa-template