Issues
- 7
Abandoned Project
#96 opened by Nighteyez07 - 1
AD110 Front Door Motion Does Not Publish - "ProfileAlarmTransmit" is not used
#83 opened by DayRunner131 - 1
Is this still supported? I was excited to find this and tried integrating into my Home Assistant, which somewhat worked but issues below
#105 opened by kylewilliams321 - 10
Error on Human detected
#67 opened by anacozero - 5
Request: Configurable HTTP time out and throttle / stop connection attempts until ping succeeds
#33 opened by bagobones - 3
HTTPError('400 Client Error: Bad Request for url:
#101 opened by Vendo232 - 0
Name does not resolve
#94 opened by yottanami - 9
Client error '403 Forbidden'
#92 opened by alexolivier - 8
[ERROR] Error fetching camera details
#80 opened by ktoms71 - 1
- 3
Amcrest doorbell AD110 button status always on
#68 opened by dinki - 2
Issue with AD410
#78 opened by pstapley - 0
FR: Better Versioning
#76 opened by ikifar2012 - 1
Human Detection not passing to MQTT
#69 opened by Maxcodesthings - 1
Received message on illegal discovery topic 'homeassistant/sensor/amcrest2mqtt on HA startup
#35 opened by bagobones - 3
- 2
Container shutting down on connection loss.
#44 opened by Emotive9 - 1
Request: TimeStamp update
#38 opened by arcangel321 - 0
AD110 not pulling full Firmware version
#53 opened by Airey001 - 2
HTTPError '400 Client Error: Bad Request for url
#47 opened by MarcAnt1 - 29
Create a Home Assistant add-on
#1 opened by dchesterton - 1
events not available anymore
#63 opened by cithraul - 3
- 0
Not working anymore?
#49 opened by pageb018 - 1
Is amcrest MQTT broken?
#41 opened by ralphmackinder - 1
- 0
Add support for audio detection
#18 opened by dchesterton - 2
Request: Need an online / offline state sensor
#30 opened by bagobones - 1
BUG: gets stuck in a HTTPErrror loop if the camera is unavailable for a short time due to settings updates or reboot
#32 opened by bagobones - 2
Polling Events?
#28 opened by BostonMikeGetHub - 4
- 3
Storage Poll too frequent
#22 opened by dhughes76227 - 1
Failing to login
#24 opened by zachsteffens - 4
400 Client Error: Bad Request
#17 opened by leonardomrc - 2
Motion events not sent to MQTT for AD110
#16 opened by rakeshdas1 - 5
AD410 motion event code
#6 opened by iankaufmann - 2
Motion events not registering in mqtt
#13 opened by drizuid - 1
Imou flood light & siren
#4 opened by geyles - 3
- 1
MQTT connection issue
#2 opened by DrJeff