dcturner/ECS_METRO

Issues

• Queues in the right direction

  #60 opened 7 years ago by dcturner
  0

• Two more layouts

  #61 opened 7 years ago by dcturner
  0

• Reorder queues after train departs - stop people from standing way back in their old position

  #51 opened 7 years ago by dcturner
  0

• Working STATION

  #38 opened 7 years ago by dcturner
  0

• Cross walks - wrong way round again :)

  #58 opened 7 years ago by dcturner
  0

• match correct walkways - use nearest walkway

  #59 opened 7 years ago by dcturner
  0

• Cap it all off with a TRIPLE station - the main hub

  #37 opened 7 years ago by dcturner
  0

• Layout a new line with some adjacent platforms to other lines

  #34 opened 7 years ago by dcturner
  0

• Successfully test a commuter moving between LINES using platform walkways

  #36 opened 7 years ago by dcturner
  0

• Template System for interesting scenarios

  #40 opened 7 years ago by dcturner
  0

• Store track layouts in prefabs

  #39 opened 7 years ago by dcturner
  0

• Figure out why it thinks it can walk from Y2 to R2

  #56 opened 7 years ago by dcturner
  0

• Once algorithm has run - decode it into commuter tasks

  #55 opened 7 years ago by dcturner
  0

• Adjacent platforms need expanding - not taking in a wide enough span

  #57 opened 7 years ago by dcturner
  0

• Get on / off walkways to link up between platforms

  #35 opened 7 years ago by dcturner
  0

• Add a second line and successfully test random commuters on that as well

  #33 opened 7 years ago by dcturner
  0

• Devise shortest journey algorithm

  #53 opened 7 years ago by dcturner
  0

• reformat the "shortest path" code to use the newly ordered platform data

  #54 opened 7 years ago by dcturner
  0

• Fix train pauses - monitor passenger lists for embarrassing / disembark

  #48 opened 7 years ago by dcturner
  0

• Stop passengers from wandering to wrong queue / train points - CLEAN EXIT PLZ

  #49 opened 7 years ago by dcturner
  0

• Wrong train carriage door being selected for a walk target

  #52 opened 7 years ago by dcturner
  0

• get trains to queue behind others :(

  #50 opened 7 years ago by dcturner
  0

• Successfully complete a random dynamic commuter journey

  #32 opened 7 years ago by dcturner
  0

• When train arrives at station - announce total free spaces and spaces for each carriage

  #47 opened 7 years ago by dcturner
  0

• Print out the route for a dynamic commuter - proceed once correct

  #30 opened 7 years ago by dcturner
  0

• Get a single commuter to board a train

  #19 opened 7 years ago by dcturner
  0

• walk to entry nav point, then walk to your seat

  #43 opened 7 years ago by dcturner
  0

• Get on train, get off, walk to end point and leave without a fuss

  #31 opened 7 years ago by dcturner
  0

• Create a commuter on a random platform - with a random destination

  #29 opened 7 years ago by dcturner
  0

• Get 10 commuters onto a train and off again at the next platform

  #28 opened 7 years ago by dcturner
  0

• Destroy commuters properly - no left over nulls

  #27 opened 7 years ago by dcturner
  0

• When the train has stopped, doors have opened, tell everyone in the 'disembarking' list that they can leave - with an incremental delay? Probably not required due to random seating

  #46 opened 7 years ago by dcturner
  0

• When next platform is determined by the train - pool the passengers for matching destination indexes

  #45 opened 7 years ago by dcturner
  0

• Switch to WAIT...

  #44 opened 7 years ago by dcturner
  0

• wait until target train / carriage tells you it's ok to board

  #42 opened 7 years ago by dcturner
  0

• set target train carriage based on queue location

  #41 opened 7 years ago by dcturner
  0

• Make a commuter visit everything in one station - check route logic works - all stairs, all loading positions etc

  #18 opened 7 years ago by dcturner
  0

• Add a commuter to the start station

  #15 opened 7 years ago by dcturner
  0

• add seats to carriage prefab

  #26 opened 7 years ago by dcturner
  0

• Depending on the train length, set loading locations on the platforms - places to queue

  #17 opened 7 years ago by dcturner
  0

• Add connecting stairs to platforms

  #16 opened 7 years ago by dcturner
  0

• Define train states - get doors opening properly when stopping at station

  #14 opened 7 years ago by dcturner
  0

• Fix opposing platform rotation

  #25 opened 7 years ago by dcturner
  0

• add opposite platforms

  #24 opened 7 years ago by dcturner
  0

• On the return journey, stop your LAST carriage at the station node

  #23 opened 7 years ago by dcturner
  0

• Move Train model over from other Unity scene

  #12 opened 7 years ago by dcturner
  0

• Get proper train prefabs moving on the lines

  #13 opened 7 years ago by dcturner
  0

• Bezier handle weighting - leap rotation mix between previous and next points

  #22 opened 7 years ago by dcturner
  0

• Bezier handle weighting - leap rotation mix between previous and next points

  #21 opened 7 years ago by dcturner
  0

• Check BucketBrigade code for Handles... O_O

  #20 opened 7 years ago by dcturner
  0