All Things CQRS

A bunch of ways of doing CQRS with various Spring tools.

Getting Started

These instructions will get you and overview of how to synchronize two different datasources. We will do so by separating command and queries in a simple CQRS app. Each module represents a different way of introducing this pattern. Also, each module is a standalone Spring Boot application.

Prerequisites

What things you need to run the software:

Java 8+
docker-compose

Overview

Sample applications are based on a simple domain that serves credit cards. There are two usecases:

Money can be withdrawn from a card (Withdraw command)
List of withdrawals from a card can be read (query)

The important is that:

After a successful Withdraw command, a withdrawal should be seen in a result from list of withdrawals query.

Hence there is a need for some synchronization that makes state for commands and queries consistent.

Let's agree on a color code for commands, queries and synchronization. It will make our drawings consistent.

Commands and queries handled in one class (no CQRS)

Code can be found under in-one-class module.

Running the app:

mvn spring-boot:run

A sample Withdraw command:

curl localhost:8080/withdrawals -X POST --header 'Content-Type: application/json' -d '{"card":"3a3e99f0-5ad9-47fa-961d-d75fab32ef0e", "amount": 10.00}' --verbose

Verifed by a query:

curl http://localhost:8080/withdrawals?cardId=3a3e99f0-5ad9-47fa-961d-d75fab32ef0e --verbose

Expected result:

[{"amount":10.00}]

Architecture overview:

Automatic E2E test for REST API can be found here:

    @Test
    public void shouldSynchronizeQuerySideAfterSendingACommand() {
        // given
        UUID cardUUid = thereIsCreditCardWithLimit(new BigDecimal(100)); //HTTP POST
        // when
        clientWantsToWithdraw(TEN, cardUUid); //HTTP GET
        // then
        thereIsOneWithdrawalOf(TEN, cardUUid);
    }

CQRS with application service as explicit synchronization

Code can be found under explicit-with-dto module. Same version, but with JPA entities as results of a query can be found here.

Running the app:

mvn spring-boot:run

A sample Withdraw command:

curl localhost:8080/withdrawals -X POST --header 'Content-Type: application/json' -d '{"card":"3a3e99f0-5ad9-47fa-961d-d75fab32ef0e", "amount": 10.00}' --verbose

Verifed by a query:

curl http://localhost:8080/withdrawals?cardId=3a3e99f0-5ad9-47fa-961d-d75fab32ef0e --verbose

Expected result:

[{"amount":10.00}]

Architecture overview:

Automatic E2E test for REST API can be found here:

    @Test
    public void shouldSynchronizeQuerySideAfterSendingACommand() {
        // given
        UUID cardUUid = thereIsCreditCardWithLimit(new BigDecimal(100)); //HTTP POST
        // when
        clientWantsToWithdraw(TEN, cardUUid); //HTTP GET
        // then
        thereIsOneWithdrawalOf(TEN, cardUUid);
    }

CQRS with spring application events as implicit synchronization

Code can be found under with-application-events module.

There is also a version with immutable domain module which just returns events. It Can be found here.

Running the app:

mvn spring-boot:run

A sample Withdraw command:

curl localhost:8080/withdrawals -X POST --header 'Content-Type: application/json' -d '{"card":"3a3e99f0-5ad9-47fa-961d-d75fab32ef0e", "amount": 10.00}' --verbose

Verifed by a query:

curl http://localhost:8080/withdrawals?cardId=3a3e99f0-5ad9-47fa-961d-d75fab32ef0e --verbose

Expected result:

[{"amount":10.00}]

Architecture overview:

Automatic E2E test for REST API can be found here:

    @Test
    public void shouldSynchronizeQuerySideAfterSendingACommand() {
        // given
        UUID cardUUid = thereIsCreditCardWithLimit(new BigDecimal(100)); //HTTP POST
        // when
        clientWantsToWithdraw(TEN, cardUUid); //HTTP GET
        // then
        thereIsOneWithdrawalOf(TEN, cardUUid);
    }

CQRS with trigger as implicit synchronization

Code can be found under trigger module.

Running the app:

mvn spring-boot:run

A sample Withdraw command:

curl localhost:8080/withdrawals -X POST --header 'Content-Type: application/json' -d '{"card":"3a3e99f0-5ad9-47fa-961d-d75fab32ef0e", "amount": 10.00}' --verbose

Verifed by a query:

curl http://localhost:8080/withdrawals?cardId=3a3e99f0-5ad9-47fa-961d-d75fab32ef0e --verbose

Expected result:

[{"amount":10.00}]

Architecture overview:

Automatic E2E test for REST API can be found here:

    @Test
    public void shouldSynchronizeQuerySideAfterSendingACommand() {
        // given
        UUID cardUUid = thereIsCreditCardWithLimit(new BigDecimal(100)); //HTTP POST
        // when
        clientWantsToWithdraw(TEN, cardUUid); //HTTP GET
        // then
        thereIsOneWithdrawalOf(TEN, cardUUid);
    }

CQRS with transaction log tailing as synchronization

Synchronization done by listening to database's transaction log, which is a log of transactions accepted by a database management system.

Code can be found under with-log-tailing module.

Additional components:

MySQL to keep withdrawals and credit cards.
Apache Kafka for pub/sub for messages read from database transaction log (in this case it is MySQL).
Kafka Connect with Debezium to read MySQL’s transaction log and stream messages to Kafka’s topic.
Spring Cloud Stream to read messages from Kafka’s topic.

Running the app, remember to be in root of the project:

In docker-compose.yaml, under service kafka - CHANGE IP to match your host machine. Keep port pointing to 9092:

ADVERTISED_LISTENERS=PLAINTEXT://YOUR_HOST_IP:9092

Run the whole infrastructure:

docker-compose up

Tell Kafka Connect to tail transaction log of MySQL DB and send messages to Kafka:

curl -i -X POST -H "Accept:application/json" -H  "Content-Type:application/json" http://localhost:8083/connectors/ -d @source.json --verbose

A sample Withdraw command:

curl localhost:8080/withdrawals -X POST --header 'Content-Type: application/json' -d '{"card":"3a3e99f0-5ad9-47fa-961d-d75fab32ef0e", "amount": 10.00}' --verbose

Verifed by a query:

curl http://localhost:8080/withdrawals?cardId=3a3e99f0-5ad9-47fa-961d-d75fab32ef0e --verbose

Expected result can be seen below. Remember that it takes time to read transaction log and create a withdrawal. Hence a withdrawal might be not immedietly seen:

[{"amount":10.00}]

Architecture overview:

Since it is problematic (or immposible) to test transaction log tailing, there is no E2E test that verifies commands and queries. But we can test if a message arrival in Kafka's topic results in a proper withdrawal created. The code is here:

    @Test
    public void shouldSynchronizeQuerySideAfterLogTailing() {
        // given
        String cardUUid = thereIsCreditCardWithLimit(new BigDecimal(100));
        // when
        creditCardUpdateReadFromDbTransactionLog(TEN, cardUUid);
        // then
        thereIsOneWithdrawalOf(TEN, cardUUid);
    }

CQRS with Domain Events as synchronization

Synchronization done by sending a domain event after succesfully handling a command.

Code can be found under events module. It has 2 further modules, architecture is fully distributed. There is a source (deals with commands) and sink (deals with queries).

Additional components:

H2 DB to keep credit cards.
MongoDB to keep withdrawals.
Spring Data Reactive MongoDb to reactively talk to Mongo
Project Reactor to serve non-blocking web-service
Apache Kafka for pub/sub for domain events
Spring Cloud Stream to read/write messages from/to Kafka’s topic.

Running the app, remember to be in root of the project:

Run the whole infrastructure:

docker-compose up

A sample Withdraw command:

curl localhost:8080/withdrawals -X POST --header 'Content-Type: application/json' -d '{"card":"3a3e99f0-5ad9-47fa-961d-d75fab32ef0e", "amount": 10.00}' --verbose

Verifed by a query (notifce a different port: 8888!):

curl http://localhost:8888/withdrawals?cardId=3a3e99f0-5ad9-47fa-961d-d75fab32ef0e --verbose

Expected result can be seen below. Remember that it takes time to publish and read domain events from Kafka. Hence a withdrawal might be not immedietly seen:

[{"amount":10.00}]

Architecture overview:

Since it is not recommended to test 2 microservices in one test, there is no E2E test that verifies commands and queries. But we can test if a message arrival in Kafka's topic results in a proper withdrawal created. The code is here:

    @Test
    public void shouldSeeWithdrawalAfterGettingAnEvent() {
        //when
        anEventAboutWithdrawalCame(TEN, cardID);

        //then
        thereIsOneWithdrawalOf(TEN, cardID);
    }

Also it is possible to test if a successful withdrawal is followed eventually by a proper domain event publication. The code is here.

    @Test
    public void shouldEventuallySendAnEventAboutCardWithdrawal() throws IOException {
        // given
        UUID cardUUid = thereIsCreditCardWithLimit(new BigDecimal(100));
        // when
        clientWantsToWithdraw(TEN, cardUUid);
        // then
        await().atMost(FIVE_SECONDS).until(() -> eventAboutWithdrawalWasSent(TEN, cardUUid));
    }

CQRS with Axon Framework

Take a look here

ddd-by-examples/all-things-cqrs

All Things CQRS

Getting Started

Prerequisites

Overview

Commands and queries handled in one class (no CQRS)

CQRS with application service as explicit synchronization

CQRS with spring application events as implicit synchronization

CQRS with trigger as implicit synchronization

CQRS with transaction log tailing as synchronization

CQRS with Domain Events as synchronization

CQRS with Axon Framework