ddribin/julian-night-light

Issues

• Add resistor values to silkscreen

  #12 opened 2 years ago by ddribin
  0

• Change "D1" label to "LED"

  #7 opened 2 years ago by ddribin
  0

• Make silkscreen text bigger and thicker

  #8 opened 2 years ago by ddribin
  0

• Power pads not labeled with "+" and "-"

  #9 opened 2 years ago by ddribin
  0

• Add LED polarity to silkscreen

  #11 opened 2 years ago by ddribin
  0

• Pads are a bit too small

  #1 opened 2 years ago by ddribin
  0

• The holes on the LED are a bit too close

  #4 opened 2 years ago by ddribin
  1

• Holes on power are too big

  #3 opened 2 years ago by ddribin
  0

• Holes for transistor and photoresistor are too small

  #2 opened 2 years ago by ddribin
  1

• Use thicker traces

  #5 opened 2 years ago by ddribin
  1

• Remove ground plane

  #6 opened 2 years ago by ddribin
  0

• Change LED reference designator from "D" to "LED"

  #10 opened 2 years ago by ddribin
  1