deemoss

deemoss's Stars

• Guilouz/Creality-Helper-Script-Wiki

  Wiki for Creality Helper Script

  88286

• danielenger/Principled-Baker

  Blender Add-on: Bake PBR textures with a few clicks

  Language:Python34831

• Heinz-Loepmeier/nozzleboss

  Language:Python22510

• jimm98y/MSSQLEXPRESS-M1-Install

  Installers and installation scripts for Microsoft SQL Server Express on ARM64.

  Language:Batchfile30568

• 5axes/Calibration-Shapes

  A Cura plugin that adds simple shapes (cube, cylinder, tube) and also 24 Calibration and test parts + 7 Postprocessing scripts

  Language:Python34570

• diruuu/FluidNC

  The next generation of motion control firmware

  Language:C++53

• derFrickler/Grbl_Esp32

  A port of Grbl CNC Firmware for ESP32

  Language:nesC52

• bdring/FluidNC

  The next generation of motion control firmware

  Language:C++1.6k389

• bdring/Grbl_Esp32

  A port of Grbl CNC Firmware for ESP32

  Language:nesC1.7k532

• VoronDesign/Voron-Trident

  Voron Trident CoreXY 3D Printer design

  638190

• VoronDesign/VoronUsers

  Voron Community mods

  Language:OpenSCAD3k1.9k

• bigtreetech/BIGTREETECH-Relay-V1.2

  BIGTREETECH Relay V1.2 is an upgrade of the original (BIGTREETECH V1.0). After upgrading, a small MCU was added on the module to make the module more controllable and stable. Besides, we have also increased short circuit detection circuit. After connecting the 5V and GND on the motherboard to the module, if there is a 5V short circuit, the module will immediately power off to prevent damage on the motherboard and the risk of fire caused by short circuit.

  12528

• bigtreetech/BIGTREETECH-TMC2209-V1.2

  TMC2209 is an ultra-silent motor driver IC for two-phase stepper motors. Its continuous drive current is 2A and peak current is 2.8A. Compared with TMC2208, the driving current of this IC is not only improved by 0.6a-0.8a, but also this IC increases the function of locked-motor test.

  20638

• bigtreetech/smart-filament-detection-module

  27537

• bigtreetech/BIGTREETECH-Stepper-Motor-Driver

  Language:C13756

• Klipper3d/klipper

  Klipper is a 3d-printer firmware

  Language:C9.7k5.4k

• KlipperScreen/KlipperScreen

  GUI for Klipper

  Language:Python1.1k368

• bigtreetech/BIGTREETECH-OCTOPUS-V1.0

  This is Octopus open source material

  Language:C579340

• stawel/dialIndicatorToSerial

  Arduino based digital dial indicator (caliper) logger

  Language:C++227

• MakingStuffChannel/DigitalCalipers

  Source code and other files for reading values from digital calipers. See the project page for complete write up at http://makingstuff.info/Projects/Digital_Calipers

  Language:Arduino3514

• cbm80amiga/oled_caliper

  Digital caliper reading with Arduino

  Language:C1714

• madsci1016/Arduino-EasyTransfer

  An Easy way to Transfer data between Arduinos

  Language:C++321114

• MGX3D/EspDRO

  ESP32 DIY Digital Readout

  Language:C++8919