/mosaic-chains

Running a full node for Mosaic

Primary LanguageTypeScriptGNU Lesser General Public License v3.0LGPL-3.0

⛓ Mosaic Chains

You need node and docker installed to run the chains.

Mosaic will automatically identify if you want to run a geth node or a parity node based on the chain id or name. Any string supported by parity as a network option will start a parity node container. Any other string it tries to match to one of the available IDs in the ./chains directory and starts the geth node.

The command to start a chain is ./mosac start <chain_id>

if option --origin <origin_chain> is not provided then chain_id itself is the origin chain identifier, otherwise chain_id is auxiliary chain id.

Example:

# start orign chain.
./mosaic start ropsten

# start auxiliary chain.   
./mosac start 1406 --origin ropsten

Start command will also start a graph node by default and deploy a sub graph for the given chain. The Graph is a decentralized protocol for indexing and querying data from blockchains, which makes it possible to query for data that is difficult or impossible to do directly. To start chain without graph node use option --withoutGraphNode

Stopping a container that was started with mosaic completely removes that container from the host. Only the content in the mounted data directory remains. If you want to keep the container around, for example to debug in the logs after it was stopped automatically after starting, use the --keep option of ./mosaic start.

⚠️ Nodes started with mosaic open all available APIs. If necessary, make sure your machine is secured.

Running mosaic

Clone git clone git@github.com:OpenST/mosaic-chains.git and install npm ci. Run ./mosaic --help to get the help output. You can use the --help option with any sub-command to get the relevant help for that sub-command, e.g. ./mosaic start --help.

The default directory for mosaic to store mosaic chain data is ~/.mosaic. You can specify a different directory with the --mosaic-dir option.

Available chains

Usually, you want to run a combination of at least one origin chain with at least one matching auxiliary chain. For example Ethereum mainnet and 1414 or Ropsten and 1406.

  • Auxiliary chains running against Ethereum mainnet:
    • 1414
  • Testnet auxiliary chains running against Ropsten:
    • 1406
    • 1407

The chain id of future auxiliary chains running against Ethereum mainnet will increase by one number each. The chain id of future auxiliary chains running against Ropsten will decrease by one number each.

Dev chains

For development, you can use the dev chains. These chains have the initial chain setup contracts deployed.

Example:

# start origin chain.
./mosaic start dev-origin

# start auxiliary chain.   
./mosaic start dev-auxiliary

Default ports

By default, a chain uses the following ports:

  • port: 3<chain-id>
  • rpc: 4<chain-id>
  • ws: 5<chain-id>

Where <chain-id> would always be exactly four characters, with leading zeros in case of a shorter chain id.

Examples with different chain IDs:

Chain Port RPC WS
Ropsten (3) 30003 40003 50003
200 30200 40200 50200
1406 31406 41406 51406

Creating a new auxiliary chain

If there is no existing mosaic config with the library addresses for the origin chain then first run ./mosaic libraries <origin-chain-id> <origin-websocket> <deployer-address>. This command will create a mosaic config file for the origin chain and stores library addresses of origin chain. Generated mosaic config must be used to create multiple auxiliary chains. Ideally ./mosaic libraries command should be used once per origin chain. This command assumes that deployer address is unlocked already.

The command to create a new auxiliary chain is ./mosaic create <new-chain-id> <origin-websocket> <password-file> --origin <origin_chain>. See ./mosaic create --help for more help.

Creating a new auxiliary chain assumes that you have an unlocked account on a node that is connected to the origin chain. If that is not the case, do one or more of the steps below as required. You should know what you are doing here.

  1. Make sure you have an origin node running. If that is not the case, start one (e.g. ./mosaic start ropsten).
  2. Attach to the node (e.g. ./mosaic attach ropsten).
  3. Create a new account (personal.newAccount("password")).
  4. Create a ./password.txt (or different) file that contains password followed by a newline.
  5. Unlock the account (e.g. ./mosaic stop ropsten; ./mosaic start --unlock address --password ./password.txt ropsten).
  6. You want to lock the account again after creating the auxiliary chain has finished (e.g. ./mosaic stop ropsten; ./mosaic start ropsten).
  7. You may want to delete the password file.

Other prerequisites that you need:

  • A password file with exactly two lines (followed by a newline) of the same password. For now, this is the only way to set up the (temporary) accounts for sealing and deploying on the new auxiliary chain.
  • A websocket connection to a node that is connected to an existing origin chain. It has to have an unlocked account with sufficient balance. The account address of the unlocked account must be added to the file in the initialize directory (see next bullet point).
  • An initial configuration file in the project's initialize directory. The file name has to equal the new chain ID that you want to use. You can copy the example file and fill in your values. If you want to know what the parameters mean, check the relevant documentation in the code.

To see the help:

./mosaic create --help

A simple run would be the following:

./mosaic create 1337 ws://localhost:8746 ./password.txt --origin ropsten

Where:

  • 1337 is the new ID of the new chain.
  • ws://localhost:8746 is the websocket connection to the running origin node with an unlocked account.
  • ./password.txt is the path to the password file that contains the two identical passwords.
  • ropsten is the origin chain.

Stake Pool

Stake pool command deploys ost composer and organization contract on the origin chain where staker can request stake and pool of facilitators can facilitate stake and mint on behalf of staker.

./mosaic setup-stake-pool <originChain> <originWeb3EndPoint> <deployer> <organizationOwner> <organizationAdmin>

Where:

  • originChain is origin chain identifier.
  • originWeb3EndPoint is the web3 endpoint of the origin chain.
  • deployer Address on origin chain with funds.
  • organizationOwner Address of organization owner of ost composer contract.
  • organizationAdmin Address of organization admin of ost composer contract.

Example:

./mosaic setup-stake-pool 12346  http://localhost:8545 0x0000000000000000000000000000000000000001 0x0000000000000000000000000000000000000001 0x0000000000000000000000000000000000000001

Note: Setup stake pool command expects deployer address to be unlocked.

Redeem Pool

Redeem pool command deploys redeem pool and organization contract on the auxiliary chain where redeemer can request redeem and pool of facilitators can facilitate redeem and unstake on behalf of redeemer.

./mosaic setup-redeem-pool <originChain> <auxiliaryChain> <auxChainWeb3EndPoint> <deployer> <organizationOwner> <organizationAdmin>

Where:

  • originChain is origin chain identifier.
  • auxiliaryChain is auxiliary chain identifier.
  • auxChainWeb3EndPoint is the web3 endpoint of auxiliary chain.
  • deployer Address on auxiliary chain with funds.
  • organizationOwner Address of organization owner of redeem pool contract. * organizationAdmin Address of organization admin of redeem pool contract.

Example:

./mosaic setup-redeem-pool 12346 500 http://localhost:40500 0x0000000000000000000000000000000000000001 0x0000000000000000000000000000000000000001 0x0000000000000000000000000000000000000001

Note: Setup redeem pool command expects deployer address to be unlocked.

####Troubleshooting:

  • When starting, you get an error that the connection is not open:
    • Make sure that the websocket you provide as an argument points to a running origin node and that your machine can connect to it.
  • You get an error that your account is locked on auxiliary:
    • Make sure that the newly created auxiliary sealer doesn't use any ports that you forward to any running nodes via SSH. You can use the options --port, --rpc-port, and --ws-port with the create command to make sure you use different ports on the auxiliary sealer.
  • The EVM reverts without details at the step "stake" (on origin):
    • Make sure that you set the correct OST address in you init configuration and that your origin account has sufficient funds to pay for the stake amount plus the bounty amount (on origin).
  • Your machine is showing sign of slowness because of creation of auxiliary chains:
    • Too many docker containers could be running while creation of auxiliary chains with different chain ids. Make sure you stop the docker containers of auxiliary chains if it's not being used.

Refer integration test of mosaic-create command to understand end to end flow.

Chain Verifier

Chain verifier makes sure that newly created chain is being setup correctly.

Pre-requisites

  • Origin chain should be up and running.
  • Auxiliary chain should be up and running.
  • MosaicConfig should be populated with contract addresses.

A simple run would be the following:

./mosaic verify-chain origin-websocket auxiliary-websocket originChainIdentifier auxChainIdentifier
  • origin-websocket: Origin chain endpoint. Needed for fetching contract state variables deployed on origin chain for verification.
  • auxiliary-websocket: Auxiliary chain endpoint. Needed for fetching contract state variables deployed on auxiliary chain for verification.
  • originChainIdentifier: Origin chain identifier. e.g. chain name or chain id
  • auxChaiIdentifier: Auxiliary chain identifier. e.g. chain id

Adding an existing auxiliary chain

To add an existing chain, you need to know the bootnodes and genesis.json. If you have those, follow the steps below:

  1. Create a new directory ./chains/<origin_chain>/<chain_id>.
  2. Add the genesis file as ./chains/<origin_chain>/<chain_id>/genesis.json.
  3. Add <chain_id> to the CHAINS array at the beginning of build.sh.
  4. Run ./build.sh to generate all chain inits.
  5. Add ./chains/<origin_chain>/<chain_id>/bootnodes and add the boot nodes (see other chains for examples).

Tests

Run the tests with npm test.