This is my initialization script for R6200 Pandorabox.
Netgear R6220 with PandoraBox firmware.
Computer with macOS, Linux or any OS with SSH clients, and an ethernet port.
Only tested on macOS, but may also work on some Unix-like OS.
bash init-r6220.shCopy router folder to /tmp of the router via scp:
scp - router root@192.168.1.1:/tmp
ssh root@192.168.1.1Run general configuration script:
sh /tmp/router/general.shIf you have your own customization script:
sh /tmp/router/custom.shDefault root password is admin
Reboot the router manually once finished.
To customize, add custom.sh in router folder.
eg:
#!/bin/bash
# Parameters
export wanproto=pppoe
export pppoeuser=myusername
export pppoepasswd=mypassword
export wifissid=myssid
export wifikey=MYWIFIKEY
export channel24=6
#export ....
# Run genral.sh
sh /tmp/router/general.sh
# DHCP
echo "Configuring static leases..."
echo -e >>/etc/config/dhcp "\
config dhcp 'glan'\n\toption start '100'\n\toption leasetime '12h'\n\toption limit '150'\n\toption interface 'glan'\n
config host\n\toption name 'Hostname'\n\toption mac 'aa:aa:aa:aa:aa:aa'\n\toption ip '192.168.1.200'\n"
/etc/init.d/dnsmasq restart
# Firewall for specific lan ip
echo "Configuring firewall..."
cat /etc/firewall.user|grep glist || echo "ipset -N glist iphash">>/etc/firewall.user
cat <<EOF >>/etc/firewall.user
iptables -t nat -A PREROUTING -s 192.168.1.100 -p tcp -m set --match-set glist dst -j REDIRECT --to-port 1080
iptables -t nat -A OUTPUT -s 192.168.1.100 -p tcp -m set --match-set glist dst -j REDIRECT --to-port 1080
EOF
/etc/init.d/firewall restart
# Dropbear
echo "Configuring dropbear..."
cat <<EOF >>/etc/dropbear/authorized_keys
ssh-rsa AAAAAAAAAAAAAAAA user@hostname.local
ssh-rsa AAAAAAAAAAAAAAAA user2@hostname2.local
EOF
sed -i "s/PasswordAuth 'on'/PasswordAuth 'off'/" /etc/config/dropbear
sed -i "s/RootPasswordAuth 'on'/RootPasswordAuth 'off'/" /etc/config/dropbear
/etc/init.d/dropbear restart
reboot