This is a very basic DevNet Expert Lab on Cisco Modeling Labs managed by Terraform CML2 provider.
Device | Type | OS | Ext. Mgmt IP | Int. Mgmt IP | Description |
---|---|---|---|---|---|
UMS | Unmanaged Switch | Linux Bridge | - | - | Unmanaged switch for OOB mgmt |
CWS | CWS | Ubuntu | 192.168.1.101 | 192.168.255.2 | DevNet Expert Candidate Workstation |
Router1 | CAT8000V | IOS-XE | - | 192.168.255.51 | - |
Router2 | CAT8000V | IOS-XE | - | 192.168.255.52 | - |
Nexus1 | NX-OS 9000 | NX-OS | - | 192.168.255.53 | - |
This lab was tested with the following software versions:
- Terraform v1.7.0
- Terraform provider registry.terraform.io/ciscodevnet/cml2 v0.7.0
- Cisco Modeling Labs Version 2.6.0+build.5 (Personal license)
For this lab to run you need to purchase Cisco Modeling Labs with a Personal license. Please refer to the Cisco Modeling Labs documentation for system requirements and installation guide.
Make sure you have all software images specified above available in your Cisco Modeling Labs, especially the DevNet Expert Candidate Workstation. For more information about the Cisco Certified DevNet Expert (v1.0) Equipment and Software List and how to install CWS in CML check the Cisco Learning Network.
Download and install the latest version of Terraform on your local machine.
Terraform CML2 provider will be downloaded during the Terraform initialization as it reads it from the Terraform main.tf file.
Clone this repository to your local machine and customize the lab files.
-
Add your Cisco Modeling Labs details to the environment source file which will be used by Terraform:
TF_VAR_address="https://cml" # Your CML IP address or hostname TF_VAR_username="admin" # Your CML username TF_VAR_password="password" # Your CML password export TF_VAR_username TF_VAR_password TF_VAR_address
-
Edit all IP addresses of the device configuration files starting with
192.168.
in the configs folder and replace it with your own home or lab IP network and appropriate subnet mask.
-
Run
source .envrc
to load the CML environment variables. -
Initialize Terraform using
terraform init
-
Run
terraform plan
and review the plan before applying. -
Apply the Terraform plan with
terraform apply
and wait until the lab is online.
Run terraform destroy
to destroy the lab again. Be aware that the lab is fully removed and all configurations on the devices are lost.