People counter app is used for monitoring the people at specific area in real time.
Some of the potential use cases of the people counter app are...
- people counter app can be use for count how many people visited for specific time
- In this app we can determine this by using total count and duration.
- people counter app can also used for intrusion detection for specific time.
- We can add a switch or define a specific time and when app detect any person during a specific time or when switch is on then app can give notification or sound an intrusion alert.
- people counter app can use for monitoring number of people can allow to present in the monitoring area.
- We can add a threshold of number people if when the count of detected people go above threshold then app can send a notification or sound an alert Each of these use cases would be useful because...
- Using the people counter app we can easily monitor the specific area.
- It can be use for intrusion detection and also for allowing limited people.
- You need to install openvino successfully.
See this guide for installing openvino.
Download the pre-trained model from here:- http://download.tensorflow.org/models/object_detection/ssd_mobilenet_v2_coco_2018_03_29.tar.gz
Extract the files:-
tar -xvf ssd_mobilenet_v2_coco_2018_03_29.tar.gz
Go to the ssd_mobilenet_v2 directory and run the following command line:-
python /opt/intel/openvino/deployment_tools/model_optimizer/mo_tf.py --input_model frozen_inference_graph.pb --tensorflow_object_detection_api_pipeline_config pipeline.config --tensorflow_use_custom_operations_config /opt/intel/openvino/deployment_tools/model_optimizer/extensions/front/tf/ssd_v2_support.json --reverse_input_channel
Create model directory in the app directory and move the generated .xml and .bin file into created model directory.
Open the new terminal and run following commad:
cd <app dir>
python main_cv.py -i resources/Pedestrian_Detect_2_1_1.mp4 -m model/frozen_inference_graph.xml -l /opt/intel/openvino/deployment_tools/inference_engine/lib/intel64/libcpu_extension_sse4.so -d CPU -pt 0.6
-
This step is only required if the user previously used Chris Lea's Node.js PPA.
sudo add-apt-repository -y -r ppa:chris-lea/node.js sudo rm -f /etc/apt/sources.list.d/chris-lea-node_js-*.list sudo rm -f /etc/apt/sources.list.d/chris-lea-node_js-*.list.save -
To install Nodejs and Npm, run the below commands:
curl -sSL https://deb.nodesource.com/gpgkey/nodesource.gpg.key | sudo apt-key add - VERSION=node_6.x DISTRO="$(lsb_release -s -c)" echo "deb https://deb.nodesource.com/$VERSION $DISTRO main" | sudo tee /etc/apt/sources.list.d/nodesource.list echo "deb-src https://deb.nodesource.com/$VERSION $DISTRO main" | sudo tee -a /etc/apt/sources.list.d/nodesource.list sudo apt-get update sudo apt-get install nodejs
sudo apt update
sudo apt-get install python3-pip
pip3 install numpy
pip3 install paho-mqtt
sudo apt install libzmq3-dev libkrb5-dev
sudo apt install ffmpeg
There are three components that need to be running in separate terminals for this application to work:
- MQTT Mosca server
- Node.js* Web server
- FFmpeg server
-
For mosca server:
cd <app_dir>/webservice/server npm install -
For Web server:
cd ../ui npm installNote: If any configuration errors occur in mosca server or Web server while using npm install, use the below commands:
sudo npm install npm -g rm -rf node_modules npm cache clean npm config set registry "http://registry.npmjs.org" npm install
cd <app_dir>/webservice/server/node-server
node ./server.js
You should see the following message, if successful:
connected to ./db/data.db
Mosca server started.
Open new terminal and run below commands.
cd <app_dir>/webservice/ui
npm run dev
You should see the following message in the terminal.
webpack: Compiled successfully
Open new terminal and run the below commands.
cd <app_dir>
sudo ffserver -f ./ffmpeg/server.conf
Open new terminal and run the below commands.
source /opt/intel/openvino/bin/setupvars.sh -pyver 3.5
Now run following commands on same terminal.
For running on the CPU
python3 main.py -i resources/Pedestrain_Detect_2_1_1.mp4 -m model/frozen_inference_graph.xml -l /opt/intel/openvino/deployment_tools/inference_engine/lib/intel64/libcpu_extension_sse4.so -d CPU -pt 0.6 | ffmpeg -v warning -f rawvideo -pixel_format bgr24 -video_size 768x432 -framerate 24 -i - http://localhost:8090/fac.ffm
To see the output on a web based interface, open the link http://localhost:8080 in a browser.
For running on the GPU
python3 main.py -i resources/Pedestrian_Detect_2_1_1.mp4 -m model/frozen_inference_graph.xml -d GPU -pt 0.6 | ffmpeg -v warning -f rawvideo -pixel_format bgr24 -video_size 768x432 -framerate 24 -i - http://localhost:8090/fac.ffm
To see the output on a web based interface, open the link http://localhost:8080 in a browser.
To get the input video from the camera, use -i CAM command-line argument. Specify the resolution of the camera using
-video_size command line argument.
For example:
python3 main.py -i CAM -m model/frozen_inference_graph.xml -l /opt/intel/openvino/deployment_tools/inference_engine/lib/intel64/libcpu_extension_sse4.so -d CPU -pt 0.6 | ffmpeg -v warning -f rawvideo -pixel_format bgr24 -video_size 768x432 -framerate 24 -i - http://localhost:8090/fac.ffm
To see the output on a web based interface, open the link http://localhost:8080 in a browser.
Note:
User has to give -video_size command line argument according to the input as it is used to specify the resolution of the video or image file.
To get the input video from the camera, use -i CAM command-line argument. Specify the resolution of the camera using
-video_size command line argument.
For example:
python3 main.py -i <image_file_path> -m model/frozen_inference_graph.xml -l /opt/intel/openvino/deployment_tools/inference_engine/lib/intel64/libcpu_extension_sse4.so -d CPU -pt 0.6
To see the output open the output.jpg file in person counter app directory.