/LG-R510-BIOS-MOD

LG R510 (QL8) BIOS MOD

LG R510 (QL8) BIOS MOD

Input:

  1. Original Last InsydeH20 Bios 3.5 (QL8L3F22)
  2. Original Bios Flasher
  3. _

Warning:

  1. I am not responsible, whatever you do with the laptop you do everything at your own peril and risk.
  2. Attention: all changes in BIOS are saved in permanent flash memory.
  3. Sometimes a menu lock occurs, if you scroll through the menu categories and return to the desired item, the error disappears.

Photos:

Photo 1

Changes:

  1. Password setting (DELETED)

    Name Possible values Stably Recommendation
    Force Clear +,- +/- Added, Does not work
    Supervisor Password PASS +
    User Password PASS +

  2. Added menu (UlinProject ModA)

    Name Possible values Stably Recommendation
    IDE Controller +,- + SataController Default(+)
    HDC Configure IDE, AHCI, RAID IDE/ACHI (+), RAID (?)
    AHCI Option ROM Support +, - ?
    SATA Port [0-5] HotPlug +, - +
    ACPI Table/Features Control MENU +
    PCI Express Root Port 1 MENU +
    Chipset Configuration MENU +
    USB Configuration MENU +
    Video Configuration MENU +
    Boot Configuration MENU +
    PCI Configuration MENU +
    Internal Devices Configurations MENU +

  3. Added menu (Platform Power Managment)

    Name Possible values Stably Recommendation
    Break Event ACPI S3, Wake on PME, Wake on Modem Ring, Quickly S4 Resume, Auto wake on S5 +
    P-States +, -
    Boot performance mode Max Battery, Max Performace ?
    Thermal Mode -, TM1, TM2 +
    CMP Support Auto, - +
    SMRR Support Auto, - +
    C-States +, - +
    Enhanced C-States +, - +
    C-State Pop Down Mode +, - +
    C4 Exit Timing Mode Default, Fast, Slow, Force Slow + Default(Fast), I choose(Default/Slow)
    Hard C4E +, - +
    Enable C6 +, - +
    EMTTM +, - +
    Bi-directional PROCHOT# +, - +
    Dynamic FSB Switching +, - + Default(+), I choose(-, max performance)
    Turbo Mode +, - + Default(+), I choose(-)
    ACPI 3.0 T-States +, - + Default(-), I choose(+)
    DTS +, - +
    DTS Calibration +, - +
    Thermal Trip Points Setting Fan On[40-75], Throttle On[40-90] +++ I choose(FanOn 40, Throttle 90)

  4. Changed menu (Advanced)

    Name Possible values Stably Recommendation
    UlinProject ModA MENU +++ +++ Added
    Internal Devices Configurations MENU + DELETED, See UlinMenu

  5. Added menu (ACPI Table/Features Control)

    Name Possible values Stably Recommendation
    FACP - C2 Latency +,- ?
    FACP - C3 Latency +,- ?
    S4 wake up from RTC +,- ?
    APIC - IO APIC +,- ?
    HPET - HPET support +,- ?
    Base Address FED00000h-FED03000h ?

  6. Added menu (PCI Express Root Port 1)

    Name Possible values Stably Recommendation
    PCI Express Root Port 1 +,- ?
    VC1 Enable Auto,- ?
    VC1/TC Mapping TC0-TC7 ?
    ASPM +,- + See Chipset Configuration
    Automatic ASPM Auto,Manual + See Chipset Configuration
    ASPM L0s -,Root,Endpoint,RootAndEndpoint ?
    ASPM L1s -,Root,Endpoint,RootAndEndpoint ?
    URR +,- ?
    FER +,- ?
    NFER +,- ?
    CER +,- ?
    CTO +,- ?
    SEFE +,- ?
    SENFE +,- ?
    SECE +,- ?
    PME Interrupt +,- ?
    PME SCI +,- ?
    Hot Plug SCI +,- ?

  7. Added menu (Chipset Configuration)

    Setup Warning:

    Setting items on this screen to incorrect values

    May cause your system to malfunction!

    Name Possible values Stably Recommendation
    CRID +,- ?
    Port 80h Cycles PCI BUS,LPC BUS ?
    DMI Link ASPM Control +,- + I choose(max performance)
    Automatic ASPM +,- + I choose(max performance)
    ASPM L0s Support +,- ?
    ASPM L0sL1 Support +,- ?
    PCI Latency Timer 32-248 +
    Memory Thermal Management MENU +

  8. Added menu (Memory Thermal Management)

    Name Possible values Stably Recommendation
    TM Mode -,TM,Catastrophic ?
    TS on DIMM +,- ?
    TM Lock +,- ?

  9. Added menu (USB Configuration)

    Name Possible values Stably Recommendation
    EHCI 1 +,- ?
    EHCI 2 +,- ?
    UHCI 1 +,- ?
    UHCI 2 +,- ?
    UHCI 3 +,- ?
    UHCI 4 +,- ?
    UHCI 5 +,- ?
    Per-Port Control +,- ?
    Usb Port0 +,- ?
    Usb Port1 +,- ?
    Usb Port2 +,- ?
    Usb Port3 +,- ?
    Usb Port4 +,- ?
    Usb Port5 +,- ?
    Express Card +,- ?
    USB Pre-fetch Feature +,- ?
    USB Pre-fetch Time 4ms/2ms ?

  10. Added menu (Video Configuration)

    Name Possible values Stably Recommendation
    PEG Aperture Size 64,128,256 + I choose (256)
    ASPM +,- +
    Automatic ASPM Auto,Manual +
    ASPM L0s -,Root,Endpoint,RootAndEndpoint ?
    ASPM L1s -,Root,Endpoint,RootAndEndpoint ?
    ASPM L0s Aggressiveness Normal, Aggressive, Ultra-aggressive ?
    Render Standby +,- ?
    IGD - Device2,Function1 +,- ?
    IGD - Pre-allocat Memory 64,128,256 + I choose (256)
    IGD - DVMT Size 64,128,256 + I choose (256)
    Clock Chip Initialize -,48Mhz,64Mhz ?
    Enabled CK SSC +,- ?
    IGD - Boot Type VBIOS Default, CRT, LFP, CRT+LFP, TV, LFP-SDVO, EFP, TV-SDVO, CRT+LFP-SDVO, CRT+EFP ?
    IGD - LCD Panel Type (LVDS) 640x480, 800x600, 1024x768, 1280x1024, 1400x1050 (LVDS1), 1400x1050(LVDS2), 1600x1200 LVDS ?
    IGD - TV VBIOS, NTSC, PAL, SECAM ?
    IGD - PAVP Mode -,Lite,High +/- -/Lite (Stable), High (After a while, the chip freezes.)
    IGD - Gfx Low Power Mode +,- ?

  11. Added menu (Boot Configuration)

Name Possible values Stably Recommendation
Numlock +,- +
Zip Emulation Type FDD, HDD +
  1. Added menu (PCI Configuration)
Name Possible values Stably Recommendation
PCI Slot3 IRQ Priority Auto, IRG3-11 ?
PCI Slot4 IRQ Priority Auto, IRG3-11 ?
  1. Changed menu (Internal Devices Configurations)
Name Possible values Stably Recommendation
Mode CIR, FIR ?
Base I/O Address 2E8, 2F8, 3E8, 3F8 ?
Interrupt IRQ3, IRQ4 ?
DMA Channel 1,2,3,4 +
HIGH SPEED Normal, High + I choose (High)