denpamusic/homeassistant-plum-ecomax

Issues

• ecoMax800 is not connected

  #114 opened 3 months ago by Almaz90
  12

• No value - Just some after reboot HA

  #115 opened 3 months ago by KaRLiKCZ
  31

• Ash pan sensor

  #21 opened 2 years ago by denpamusic
  7

• Cannot connect to ecoMAX810

  #74 opened 9 months ago by sundeveu
  12

• Add ability to create custom entities

  #58 opened 9 months ago by denpamusic
  2

• activating fuel consumption

  #75 opened 9 months ago by expansing
  3

• Total fuel burned not updating

  #45 opened 9 months ago by svenlange2
  14

• Timeouts seting parameters using the service "set parameter"

  #59 opened 10 months ago by niq83
  3

• Cannot connect to ecoMAX850P-ZT (econet300) via network

  #70 opened 9 months ago by AlexSyxar
  1

• Total fule burned is not working after network disconnect

  #66 opened 10 months ago by svenlange2
  2

• Cannot connect to ecoMAX360

  #63 opened 10 months ago by jasienty
  6

• Connection to EcoMAX860D3

  #60 opened 10 months ago by TomTesner
  0

• modify any regulation parameter ecoMAX810

  #41 opened 10 months ago by jerguitariste
  19

• The "get parameter service" to be able to respond only with the actual value

  #57 opened 10 months ago by niq83
  2

• Does not detect any devices after upgrade to v0.4.1 [Ecomax 850i]

  #56 opened a year ago by zASSAz
  2

• Add ability to associate a regdata value with a sub-device

  #55 opened a year ago by denpamusic
  0

• [ecoMAX 860P6-O] Add opening value (%) for SM A - mixing valve - circuit A.

  #54 opened a year ago by denpamusic
  8

• How to set night preset temperature?

  #53 opened a year ago by denpamusic
  1

• Error in Polish translation.

  #50 opened a year ago by jszkiela72
  4

• Couldn't find device when trying to connect to EM920P1-F via USR-W610

  #49 opened a year ago by Marek7923
  3

• ester_x40 thermostat problem

  #48 opened a year ago by jerguitariste
  9

• [EM860P2-N TOUCH] Configuration created no devices

  #44 opened a year ago by funraa
  12

• Ash pan level support for ecoMAX 860P3-S LITE

  #46 opened a year ago by dareksliwecki
  4

• Can't switch off mixer pump

  #43 opened a year ago by danielkovarik2
  3

• Integration with ecoSol

  #27 opened 2 years ago by GoganGogan
  15

• Wrong weather and mixer circuit switch.

  #42 opened a year ago by zASSAz
  3

• The burner cleaning cycle does not end, and the pellet boiler does not burn

  #26 opened 2 years ago by Edgarun
  10

• Logbook is getting spammed with alert events

  #40 opened a year ago by denpamusic
  1

• missing the stabilization attribute 12

  #39 opened a year ago by monique3838
  1

• "Invalid handler specified" error

  #38 opened a year ago by jerguitariste
  3

• When change room thermostat set temperature, not changed setting in HA

  #37 opened a year ago by Safs
  15

• Get parameter service

  #36 opened a year ago by niq83
  3

• When room panel change day to night mode by schedule, that not reflect in HA thermostat.

  #33 opened a year ago by Safs
  11

• Translators needed

  #17 opened 2 years ago by denpamusic
  1

• How to install "main" branch

  #35 opened a year ago by denpamusic
  0

• Error handling message

  #32 opened a year ago by niq83
  7

• Incomplete state translation.

  #34 opened a year ago by denpamusic
  1

• Plum ecomax 920 p1

  #30 opened a year ago by genrihb
  4

• Problem witch Summer Switch

  #29 opened a year ago by KryspianClash
  3

• Can start after update v0.3.8

  #28 opened a year ago by speedypidz
  3

• Add Mixer settings

  #25 opened 2 years ago by jwhnat
  11

• connection problem

  #24 opened 2 years ago by jerguitariste
  8

• Can't connect to the device, retrying in 20.0 seconds

  #22 opened 2 years ago by OvidiuPreda
  4

• Make baudrate configurable

  #23 opened 2 years ago by stskrp
  2

• Incorrect values are being sent to the ecoSTER panel

  #20 opened 2 years ago by denpamusic
  3

• Fanning status display error

  #19 opened 2 years ago by tusiek5
  13

• USR-TCP232-306 not connecting

  #13 opened 2 years ago by mihai198202
  11

• Stability issue and missing/corrupted frames with USB to RS485 adapter

  #16 opened 2 years ago by denpamusic
  10

• buffer temperature (top-bottom) support

  #14 opened 2 years ago by jwhnat
  14

• Update 0.2.27 - mixer_0 changed to mixer_1

  #15 opened 2 years ago by KaRLiKCZ
  2