git clone https://github.com/denver-code/sspos
cd sspos
Install the required tools with make setup or the following commands:
curl https://sh.rustup.rs -sSf | sh
rustup install nightly
rustup default nightly
cargo install bootimage
Build the image to disk.img:
make image output=video keyboard=qwerty
Run sspos in QEMU:
make qemu output=video nic=rtl8139
Run natively on a x86 computer by copying the bootloader and the kernel to a hard drive or USB stick (but there is currently no USB driver so the filesystem will not be available in that case):
sudo dd if=target/x86_64-sspos/release/bootimage-sspos.bin of=/dev/sdx && sync
sspos will open a console in diskless mode after boot if no filesystem is detected. The following command will setup the filesystem on a hard drive, allowing you to exit the diskless mode and log in as a normal user:
> install
Be careful not to overwrite the hard drive of your OS when using dd inside
your OS, and install or disk format inside sspos if you don't use an
emulator.
cargo build --package sspos --bin <name> --release
Run the test suite in QEMU:
make test
sspos is released under MIT.