/OpenWRT-WPS-Button

Scripts to blink WPS LED when WPS pushbutton is active

Primary LanguageShellGNU Affero General Public License v3.0AGPL-3.0

OpenWRT WPS pushbutton scripts

Scripts to blink WPS LED when WPS pushbutton is active.

Usage

  • Replace wpad-mini with full wpad, and install hostapd-utils
opkg remove wpad-mini
opkg install wpad hostapd-utils

  • Enable wps_pushbutton, either with LuCI or by adding option wps_pushbutton '1' to wifi-iface in /etc/config/wireless.

  • Add buttons script to /etc/hotplug.d/button/ and make it executable.

  • In order to find the right button, press it then run logread.

  • Update buttons with the right button string, then remove or comment the exit line.

  • Add wps_pushbutton to /usr/bin/ and make it executable.

  • Update wps_pushbutton and set the LED variables to the ones available in your device. Run ls /sys/class/leds to find available LEDs.

When pressing the WPS button, the WPS LED should blink until it times out or a device is paired. When pressed again, it should cancel the WPS procedure.

Report issues if you find any.