/Watchy

Watchy - An Open Source E-Ink Smartwatch

Primary LanguageCMIT LicenseMIT

Watchy - Fully Open Source E-Paper Watch

Watchy

Visit https://watchy.sqfmi.com for documentation, hardware design files, and more!

Setup

  1. In the Arduino IDE Boards Manager, install support for the ESP32. You can find instructions here: https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/boards_manager.md
  2. Install this library (search for Watchy in the library manager), and any other depdencies when prompted
  3. Check out the examples under Examples -> Watchy
  4. Compile & Upload with these board settings:
    • Board: "ESP32 Dev Module"
    • Partition Scheme: "Minimal SPIFFS"
    • All Other Settings: leave to default

You may also have to install the CP2104 USB to Serial drivers if the port is not automatically detected

Have Fun! :)