/Skeleton-Dactyl-Mini

Primary LanguageC

Skeletyl

This is a fork of the Skeletyl originally designed by HID-Technologies (further developed by BastardKB into Skeletyl V2).

Changes / Design Goals

  • Increase pinky column stagger
  • Reinforce case connecting pinky column
  • (Ambitious) Adjust thumb angles and position
  • (Yeah right) make a 3x5 version see TBK Mini

Timelapse Build

Build Timelapse

Wiring

For re-using dactyl manuform firmware this wiring should be backwards compatible, with some minor difference to the thumb cluster.

Flashing

  • Install qmk toolbox
  • Press reset button on controller (short RST pin to GND pin)
  • Find hex file you want to flash and press flash in UI

Skeleton-Dactyl-Mini

Made to be used with

  • 4mm tapered screws (optional if not using bottom plate)
  • 4mm long screw inserts (optional if not using bottoms plate)
  • USB-C microcontroller
  • 3.5mm audio jack

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.