DMXStudio DMX Controller See details in the wiki https://github.com/desantir/DMXStudio/wiki Target environment: - Tested with Windows 10 32 bit Build Environment: - Microsoft Visual Studio 2015 or 17 To use this you will need one or more of the following: - Enttac USB PRO comatible USB to DMX adapter (such as DMXking ultraDMX Micro -> http://dmxking.com/usbdmx/ultradmxmicro) or - Build your own simple USB-based DMX hardware controller based on the FTDI chip (about $20): - FTDI Basic Breakout - 5V http://www.amazon.com/gp/product/B0068QKQEA/ https://www.amazon.com/Sparkfun-Electronics-4446819-FTDI-Cable/dp/B00DJBNDHE (alternate) - TI SN75176BP http://www.mouser.com/ProductDetail/Texas-Instruments/SN75176BP/ - Micro USB to USB B cable http://www.amazon.com/gp/product/B001TH7GUK/ - 1x3" breadboard http://www.amazon.com/gp/product/B0040Z6OK6 - XLR connector - 1 100 Ohm resistor - Project box (optional) http://www.radioshack.com/product/index.jsp?productId=2062280 - Wire / soider /etc - The FTDI LIB & DLL from FTDI Corp. http://www.ftdichip.com/Drivers/D2XX.htm - DMX controllable fixture(s) and DMX channel descriptions