Pinned Repositories
3dp-mavic-clone
This is my build of the Mavic clone from https://diyrc.co.uk. I have tried to consolodate everything into one repo including a BOM with assembly instructions.
android_device_nokia_PL2
android_device_nokia_sdm660-common
android_hardware_samsung_nfc
android_kernel_nokia_sdm660
AppleALC
Native macOS HD audio for not officially supported codecs
BK3254
arduino library for A2DP bluetooth module based on BK3254 chip from Beken Corp (F-6888)
Chronoswitch
Downgrader utility for the Playstation Portable
dwt_delay
Microseconds delay lib for STM32 (or whatever ARM) based on DWT
EDAutopilot
Elite Dangerous computer vision based auto-navigation including long range routing
devMorpheus's Repositories
devMorpheus/3dp-mavic-clone
This is my build of the Mavic clone from https://diyrc.co.uk. I have tried to consolodate everything into one repo including a BOM with assembly instructions.
devMorpheus/android_device_nokia_PL2
devMorpheus/android_device_nokia_sdm660-common
devMorpheus/android_hardware_samsung_nfc
devMorpheus/android_kernel_nokia_sdm660
devMorpheus/AppleALC
Native macOS HD audio for not officially supported codecs
devMorpheus/BK3254
arduino library for A2DP bluetooth module based on BK3254 chip from Beken Corp (F-6888)
devMorpheus/Chronoswitch
Downgrader utility for the Playstation Portable
devMorpheus/dwt_delay
Microseconds delay lib for STM32 (or whatever ARM) based on DWT
devMorpheus/EDAutopilot
Elite Dangerous computer vision based auto-navigation including long range routing
devMorpheus/rulesABZ
devMorpheus/Example_STM32F103
devMorpheus/git-main
devMorpheus/GRBL-offline-controller
Backup firmware
devMorpheus/MissionPlanner
Mission Planner Ground Control Station (c# .net)
devMorpheus/proprietary_vendor_nokia
devMorpheus/proprietary_vendor_nokia_PL2
devMorpheus/RF24
OSI Layer 2 driver for nRF24L01 on Arduino & Raspberry Pi/Linux Devices
devMorpheus/season-pass-extension
devMorpheus/TX5823
FPV Sender mit Kanalwahl und konfiguration über SPI. Integriertes OSD mit MAX7456 und Spannungswandlern für 5V, 3,3V und 12V über einen Eingangsspannungsbereich von 8V bis 25.2V.
devMorpheus/zLCD
Arduino library for ST7920